Whirlpool 3VED23DQ Manuel d'utilisation et d'entretien - Page 20
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Whirlpool 3VED23DQ. Whirlpool 3VED23DQ 30 pages. No-frost refrigerator-freezers with thirst crusher
Également pour Whirlpool 3VED23DQ : Manuel d'utilisation et d'entretien (25 pages)
Imprimer la page
Removing
the base grille
To remove the grille:
1. Open both doors.
2. Pull base grille forward to release the
support tabs from the metal clips.
3. Do not remove Tech Sheet fastened
behind the grille.
To replace the grille:
1. Line up grille support tabs with metal
clips.
2. Push firmly to snap into place.
3.
Close the doors.
See cleaning instructions for defrost pan and
condenser coils on page 24.
Condenser
coils
-_--
grille
Changing
the light
bulbs
Electrical
Shock Hazard
Before removing a light bulb, either
unplug the refrigerator or disconnect
the electricity leading to it at the main
power supply.
Failure to do so could result in per-
sonal injury.
To change refrigerator
light:
1. Disconnect refrigerator from power supply.
2. Reach behind the Control Console to
remove bulb.
3. Replace bulb with a 40-watt appliance bulb.
4. Reconnect refrigerator to power supply.
To change crisper
light:
1.
2.
Disconnect refrigerator from power supply.
Pull top of light shield forward until it snaps
free.
3.
Lower light shield to clear bottom supports.
4.
Pull light shield straight out to remove.
5.
Replace bulb with a 40-watt appliance bulb.
6.
Replace light shield in reverse order.
7.
Reconnect refrigerator to power supply.
risper
light
20