Ariston TVF 75 C Livret d'instructions - Page 3

Parcourez en ligne ou téléchargez le pdf Livret d'instructions pour {nom_de_la_catégorie} Ariston TVF 75 C. Ariston TVF 75 C 16 pages.

Imprimer la page

Electrical connections

Before plugging the appliance into the

socket, check the following:

Make sure your hands are dry.

The socket must have an earth connection.

The socket must be able to withstand the

machine's maximum power output as

indicated on the rating plate (see Description

of the tumble dryer).

The power supply voltage must fall within

the values indicated on the rating plate (see

Description of the tumble dryer).

Do not use extension leads. Do not pull the

power supply cable. Do not use multiple plug

adaptors if the appliance is fitted with a plug.

For appliances with fitted plug, if the plug is

not suitable for you socket outlet, contact a

qualified technician.

The dryer must not be installed outdoors,

even if the space is sheltered.

Once installed, the dryer's electrical wire

and plug must be within reach.

The power cord must not be bent or

squashed.

If the plug being replaced is a non-

rewirable type, then the cut-off plug must be

disposed of safely. DO NOT leave it where it

can be inserted into a socket and create a

shock hazard.

The electric cord must be regularly

checked. If the supply cord is damaged, it

must be replaced by service agent.

Service).

The manufacturer denies any

responsibility should any of these rules not be

followed.

If in doubt about any of the above

consult a qualified electrician.

Levelling the tumble dryer

The tumble dryer should be installed level in order to

operate correctly.

After installing the tumble dryer in its permanent position,

make sure it is level; check its side-to-side levelling first,

followed by front-to-back.

If the tumble dryer is not perfectly level, use a wooden block

to support it while you adjust the two front feet, up or down

as necessary.

Before you start your dryer

Once the tumble dryer is installed, clean the inside of the drum

before operating it and remove any dirt accumulated during

transportation.

see

(