Whirlpool WSR25D2RYB00 Instructions pour l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Instructions pour l'utilisateur pour {nom_de_la_catégorie} Whirlpool WSR25D2RYB00. Whirlpool WSR25D2RYB00 29 pages.

Imprimer la page

NOTE: Tighten t henutbyhand. Then tighten i twithawrench

twomore turns. Donotovertighten.

REFRIGERATOR U SE

A. Refrigerator water tubing

E. Ferrule (purchased)

B. Nut (provided)

F Nut (purchased)

C. Bulb

G. Household water line

D. Coupfing (purchased)

4. Turn shutoff valve ON.

5. Check for leaks. Tighten any nuts or connections (including

connections at the valve) that leak.

Style 3

1. Unplug refrigerator or disconnect power.

2. Remove and discard the cap from the gray water tube.

A. Cap

B. Inlet

Using a compression nut and sleeve, attach the copper tube

to the water inlet.

Once secured, tighten the compression

nut. Do not

overtighten.

Check the connection by pulling on the copper tubing. Turn on

water supply to refrigerator. Check for leaks. Tighten any nuts

or connections that leak.

Complete the Installation

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension

cord.

Failure to follow these instructions can result in death,

fire, or electrical

shock.

1. Plug into a grounded 3 prong outlet.

2. Flush the water system. See "Prepare the Water System" or

"Water and Ice Dispensers."

NOTE: Allow 24 hours to produce the first batch of ice. Allow

3 days to completely fill ice container.

For your convenience, your refrigerator controls are preset at the

factory. When you first install your refrigerator, make sure that the

controls are still preset. The Refrigerator Control and the Freezer

Control should both be set to the "mid-settings."

Style 1: Rotary Controls

FREEZER

REFRIGERATOR

COLD l_s

COLDER

2__'.

COLD 1

s COLDER

__J

Style 2: Slide Controls

Freezer

Refrigerator

cold

colder

off

colder

IM PC RTANT:

•

Your product will not cool when the REFRIGERATOR Control

is set to OFE

The Refrigerator Control adjusts the refrigerator compartment

temperature. The Freezer Control adjusts the freezer

compartment

temperature. Settings to the left of the

mid-setting

make the temperature less cold. Settings to the

right of the mid-setting make the temperature colder.

Wait 24 hours before you put food into the refrigerator. If you

add food before the refrigerator has cooled completely, your

food may spoil.

NOTE: Adjusting the Refrigerator and Freezer Controls to a higher

(colder) than recommended

setting will not cool the

compartments

any faster.

Adjusting Controls

Give the refrigerator time to cool down completely before adding

food. It is best to wait 24 hours before you put food into the

refrigerator. The settings indicated in the previous section should

be correct for normal household refrigerator usage. The controls

are set correctly when milk or juice is as cold as you like and when

ice cream is firm.

Rotary Controls: Turn the control right (clockwise) to make the

compartment

colder. Turn the control left (counterclockwise)

make it less cold. To turn the cooling system off, turn the

Refrigerator Control counterclockwise

until it reaches the OFF

position.

Slide Controls:

Slide the control one setting to the right to make

the compartment colder. Slide the control one setting to the left to

make it less cold.

If you need to adjust temperatures

in the refrigerator or freezer,

use the settings listed in the chart below as a guide. Wait at least

24 hours between adjustments.