Whirlpool 27' Manuel d'instructions d'installation - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Whirlpool 27'. Whirlpool 27' 32 pages. Microwave oven and thermal oven
Également pour Whirlpool 27' : Aide à l'emploi (36 pages), Manuel d'instructions d'installation (11 pages), Manuel d'instructions d'installation (11 pages), Manuel d'instructions d'installation (48 pages), Manuel d'instructions d'installation (22 pages), Manuel d'instructions d'installation (27 pages), Manuel d'instructions d'installation (12 pages), Instructions d'installation (5 pages)

6. Using 2 or more people, place the oven in its upright position.

7. Go to the "Make Electrical Connection" section.

Double Ovens

The positioning of the oven feet allow a double oven to be

installed in a cutout height between 48⁷⁄₈" (124.1 cm) and 52³⁄₁₆"

(132.6 cm). Refer to the following instructions to position the feet

for the size of your cabinet cutout.

Cutout height is between 48⁷⁄₈" (124.1 cm) and 50⁷⁄₁₆"

(128.1 cm)

The oven feet do not need to be installed. The oven is configured

correctly as received.

NOTE: Do not remove the spacers.

Go to the "Make Electrical Connection" section.

A. Spacers

Cutout Height is between 50¹⁄₂" (128.2 cm) and 51¹⁄₈"

(129.9 cm)

1. Using 2 or more people, place the oven on its back on a

covered surface.

2. Install a foot on the left rear spacer using a #8-18 x ³⁄₈" screw.

NOTE: Position the foot so the long side of the foot is facing

toward the top of the oven.

3. In the same manner, install a foot on the right rear of the oven.

4. Install a front foot on the left front spacer using a #8-18 x ³⁄₈"

screw.

NOTE: Position the foot so the long side of the foot is facing

toward the inside of the oven.

5. In the same manner, install a front foot on the right front of the

oven.

A. Spacer

B. Foot

³⁄₈

C. #8-18 x

" screw

A. Front foot

³⁄₈

B. #8-18 x

" screw

C. Spacer