Whirlpool 4GWED4750 Manuel d'utilisation et d'entretien - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Whirlpool 4GWED4750. Whirlpool 4GWED4750 36 pages. Electric or gas dryer

Imprimer la page

1. Specifications

Select the desired cycle

Cool

Damp

Dry

Tumble

Press

Delicate

Coo_

ENERGY

DOW_'_

Very

Dry

Jeans

AUTOMATIC

FLUFF AIR

no heat

DRY

Appearance

may vary

Select the desired cycle for your load. See the Cycle Guide

for more information about each cycle.

AUTOMATIC

DRY Cycles

You can select a different dryness level, depending on your

load, by turning the knob to dryness level.

Selecting Jeans*, Very Dry, ENERGY PREFERRED, or Less Dry

/Delicate automatically

adjusts the dryness level at which the

dryer will shut off. Once a dry level is set, it cannot be changed

without stopping the cycle.

AUTOMATIC DRY cycles give the best drying in the shortest

time. Drying time varies based on fabric type, load size, and

dryness setting.

NOTE: Jeans* is used for heavy fabric loads and removes

the most moisture. Very Dry removes load moisture and is

used for medium fabric loads. ENERGY PREFERRED is used

for a starting point for AUTODRY cycles. Choose ENERGY

PREFERRED for optimal energy savings. Less Dry/Delicate

removes less moisture and used for loads you may want to put

on a hanger to complete drying.

* This option is only available on some models.

4. Set cycle settings

and options

(on some models)

5. Select End of Cycle Signal

(if desired)

PUSH TO START

Turn the END OF CYCLE SIGNAL knob to select the desired

setting (On or Off). The End of Cycle Signal produces an

audible sound when the drying cycle is finished. Promptly

removing clothes at the end of the cycle reduces wrinkling.

NOTE: When the Wrinkle Shield setting is selected and

the End of Cycle Signal is on, the tone will sound every

5 minutes until the clothes are removed, or the Wrinkle

Shield setting ends.

6. Press PUSH to START to

begin cycle

PUSH TO START

Push and hold the PUSH to START knob to begin the cycle.

Promptly remove garments after cycle has completed to

reduce wrinkling. Use the Wrinkle Shield feature to avoid

wrinkling when you are unable to remove a load from the

dryer as soon as it stops.

Select cycle settings and options by turning the knob to the

desired position.

TEMPERATURE

/ FABRIC (on some models)

Turn the TEMPERATURE / Fabric knob to change the drying

temperature setting. See "Setting the Drying Temperature".

WRINKLE SHIELD FEATURE (on some models)

[] Get up to 40 minutes of heat-free, periodic tumbling at the

end of a cycle. Turn the WRINKLE SHIELD knob to select

ON or OFF at any time before the cycle has ended.

NOTE: Not all options and settings are available with all cycles.