Whirlpool 4KWED4900BQ0 Manuel d'utilisation et d'entretien - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Whirlpool 4KWED4900BQ0. Whirlpool 4KWED4900BQ0 48 pages.

Imprimer la page

Set cycle settings and options

(on some models)

Select cycle settings and options by turning the knob to the

desired position.

TEMPERATURE/FABRIC (on some models)

Turn the TEMPERATURE/Fabric knob to change the drying

temperature setting. See "Setting the Drying Temperature".

WRINKLE SHIELD FEATURE (on some models)

Get up to 40 minutes of heat-free, periodic tumbling at the

end of a cycle. Turn the WRINKLE SHIELD knob to select

ON or OFF at any time before the cycle has ended.

NOTE: Not all options and settings are available with all cycles.

Select End of Cycle Signal, if

desired (on some models)

Turn the END OF CYCLE SIGNAL knob to select the desired

setting (On or Off). The End of Cycle Signal produces an audible

sound when the drying cycle is finished. Promptly removing

clothes at the end of the cycle reduces wrinkling.

NOTE: When the Wrinkle Shield setting is selected and

the End of Cycle Signal is on, the tone will sound every

5 minutes until the clothes are removed, or the Wrinkle

Shield setting ends.

Press PUSH to START to

begin cycle

Appearance may vary

Push and hold the PUSH to START knob to begin the cycle.

Promptly remove garments after cycle has completed to

reduce wrinkling. Use the Wrinkle Shield feature to avoid

wrinkling when you are unable to remove a load from the dryer

as soon as it stops.