AEQ AM-03 Manuel de l'utilisateur - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEQ AM-03. AEQ AM-03 13 pages. Self-powered stereo audio monitor
Également pour AEQ AM-03 : Manuel de l'utilisateur (13 pages)
3.
AUDIO CONNECTIONS
3.1.
General
The AM-03 is equipped, in the back panel, with six stereo audio inputs and a parallel
output that allow to direct the audio signal that is being monitored to, for example, metering
instruments, patch panel, etc. For this connections, female connector are supplied.
In addition, this equipment features a frontal headphone output to monitor directly the
selected audio output.
3.1.1. Audio input connections
The six connections are numbered from 1 to 6. The left and right channels are labeled
R and L, respectively, as well as the signal of each connector's pin, V+ for the positive
polarity, V- for the negative polarity and GND for the ground.
3.1.2. Audio output connections
The equipment has one stereo audio output in the back panel that uses three pin
connectors to monitor the selected audio signal with a measurement equipment or similar. To
use this output, the equipment must to be on.
In the front panel, there is a headphone output for a direct monitoring of the selected
output.
PARALLEL
OUTPUT
AEQ AM‐03
Self‐powered Stereo Audio Monitor
HEADPHONE
OUTPUT