Whirlpool 859991636290 Manuel rapide - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel rapide pour {nom_de_la_catégorie} Whirlpool 859991636290. Whirlpool 859991636290 12 pages.

Imprimer la page

Quick guide

CLEANING AND MAINTENANCE

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.

In order to receive a more complete assistance, please register

In order to receive a more complete assistance, please

WARNING: unplug the dryer during the cleaning and

your product on www.whirlpool.com.hk

your product on:

maintenance procedures.

www.whirlpool.com.hk / www.whirlpool.com.sg

Emptying the water tank after each cycle (see Fig. A).

Pull the container out of the dryer and empty it into a sink or other

suitable drain, then place it back properly. Do not use the dryer

without having inserted the container back in place.

Cleaning the door filter after each cycle (see Fig. B).

Pull the filter out and clean it by removing the lint from the filter

surface under running water or using a vacuum cleaner. For optimal

performance, dry up the filter before inserting it back in place.

Do not use the dryer without having reinserted the filter in place.

Remove the door filter as described below:

1. Open the door and pull the filter upwards.

2. Open the filter and remove the lint from all its parts. Replace the

filter correctly making sure it is fully seated.

Cleaning the bottom filter when the relevant indicator

turns on (see Fig. C).

Pull the filter out and remove the lint from its surface by washing

it under runing water or by using a vacuum cleaner.

However, it is advisable to clean this filter after each cycle to

optimise drying performance.

Do not use the dryer without having reinserted the filter in place.

Remove the bottom filter as described below:

C1. Open the bottom cover; take the handle and pull the filter

out.

C2. Open the rear side of the filter and remove the lint from the

inner surface of the mesh.

C3/C4. Check the bottom filter chamber every month. If you

see residual lint accumulated on the metal fins, clean it with a

vacuum cleaner, using a nozzle with a brush.

It's crucial to do vertical movements, you may destroy the

component if you try to clean it in horizontal direction. Avoid the

direct contact of the hand with the fins - risk of cut.

C5. Close the rear side of the filter and place it back by checking it

is perfectly integrated into its seat, then lower the filter handle.

C6. Close the bottom cover.

Make sure the air intake is free.

The filters are essential parts for drying. They are intended

to collect the lint formed during the drying process. In case

of clogged filters, the air flow inside the dryer would be

seriously affected: the drying times would be longer, the

energy consumption would increase and the dryer could be

damaged. If these procedures are not carried out properly,

the dryer may not start.

NOTE: After cleaning the filters the relevant indicator remains

PRODUCT DESCRIPTION

Water Tank

Air Intake

Bottom filter

Door filter

Policies, standard documentation, ordering of spare parts and additional product information can be

found by:

You can download the user manual by:

• Visiting our website docs.whirlpool.eu and parts-selfservice.whirlpool.com

• Visiting our website www.whirlpool.com.hk

• Visiting our website www.whirlpool.com.hk/www.whirlpool.com.sg

• Using QR Code

• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When

contacting our After-sales Service, please state the codes provided on your product's identification plate.

on; this is normal, it will disappear when you start a new drying

Before using the appliance carefully read the Safety

cycle.

Instruction.

Cleaning the tumble dryer

• The external metal, plastic and rubber parts can be cleaned

with a damp cloth.

• Clean the front air intake grille regularly (every 6 months) with

a vacuum cleaner to remove any lint, fluff or dust deposits.

Furthermore, remove any lint deposits from the filters area,

using a vacuum cleaner every so often.

• Do not use solvents or abrasives.

TRANSPORT AND HANDLING

Never lift the dryer by holding it at the worktop.

1. Unplug the dryer.

2. Remove the water from the water tank completely.

3. Make sure that door and water tank are properly closed.

4. If the drain hose is connected to your drainage system,

re-connect it to the back of the dryer (see "Installation" section

in the Safety Instruction guide).

Power consumption

off-mode (Po) - Watts

left-on mode (Pl) - Watts

Programs

Eco *

Eco

Synthetics

*This is the reference programme for the energy label and suitable to

dry normal wet cotton laundry. This is the most efficient programme

in terms of energy consumption for drying wet cotton laundry.

(Standard/Default starting configuration).

Heat Pump System

The heat pump contains fluorinated greenhouse gases,

contained in a hermetically sealed unit. This sealed unit contains

0.15 kg of the R134a gas. GWP =604 (1 t CO2).

0.50

2.00

kWh

Minutes

2.58

215

1.38

127

1.19

116

xxxxxxxxxxxx

xxxx