Whirlpool ADN 494 Manuel d'utilisation - Page 14
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Whirlpool ADN 494. Whirlpool ADN 494 33 pages.
Imprimer la page
E020401CW
Restart the machine.
Press the buttons "UP" and "DOWN" at the same
time while the display shows "SELECT A
PROGRAM".
Appears
"ENTER".
Appears "0". Insert the code 777 and confirm
pressing "ENTER".
Appears "INSTALLATION": press "ENTER".
Appears "CURRENCY": press "ENTER".
Appears the first parameter : "XXX".
With the buttons "UP" and "DOWN" is possible to
defoliate the parameters and to go out from the
programming system with the button "STOP"
different times up tot eh display shows "SELECT
A PROGRAM"
XXX
With this parameter is possible to select the type
of currency, seeing the possibilities with the
buttons "UP" and "DOWN" XXX token
EUR
euro
DKR
Danmark Krona
L
English Pound
SKR
Swedish Krona
SFR
Swiss Franc
CS
Canadian Dollar
USD
American Dollar
YEN
Japanese Yen
Chosen the symbol press "ENTER" to confirm.
ANOTHER CURENCY
You can add another personalized currency (three
letters), by pressing "ENTER" insert the three
letters and confirm with ENTER.
DECIMAL CURRENCY
Permits to define the number of decimal cipher of
the personalized currency. Press "ENTER" and
include the number. Press "ENTER" again to
confirm
MINIMUM PRICE
The coefficient for which the specific price of all
the programs is multiplied, to obtain the starting
minimum amount.
For example: having defined the parameters "Cost
of the program" and "minimum time" (par. 11), it
has been programmed that the first program
HIGH (90°) has a 10 minutes duration (minimum
time) and that its cost is 1€ (cost of the program).
If it is programmed for a MINIMUM PRICE=3€,
the minimum amount to start the program will be
of 3€. The final customer will buy a 30 minutes
drying at 90°C. Started the program it will be
possible to increase the drying time by adding just
1€ (cost of the program) which it will add a further
10 minutes drying (minimum time).
While appears "MINIMUM PRICE" on the display
press "ENTER". The display will show "1". To
modify it, insert the amount as for the desired
program and press "ENTER".
TOKEN 1
Recognized by the first coin box. Press "ENTER"
and insert the value of the coin in the first coin
box. "ENTER" to confirm.
TOKEN 2
"PASSWORD".
Press
Recognized by the second coin box (if provided).
Press "ENTER" and insert the value of the coin in
the second coin box. ENTER to confirm
"UNITY TEMPERATURE" appears on display .
Press stop twice and go out from programming.
To program the costs and the minimum times of
each program, please refer to the correspondent
parameters, (par. 11) "PROGRAMMING".
13. ALARMS
Please find hereafter a list of the alarms which
stops the machine:
DEPRESSION
At the starting -up of the heating phase there is
not enough depression inside the dryer; the
buzzer will ring and the machine will be blocked.
Press the STOP key to stop the alarm; the display
will show "PRESS STORT": the machine is ready
for operation. If the alarm rings again, turn off
power connection and call technical assistance
SENSOR DEPRESSION
This alarm is displayed when you try to start a
program while the fun is still functioning. Please
wait 30 seconds and try again the operation.
If the warning still appear, switch off the machine,
disconnected the alimentation and call our
technical assistance
OPEN DOOR
The door is open. Close the door and press
START to activate the program or STOP to
interrupt it. If the alarm rings again, turn off the
machine, take off all connections and call for
assistance.
OPEN FILTER
The filter box is not closet correctly. Close again
the filter box and press "START" to restart the
program or "STOP" to interrupt it. If the alarm
rings again, also when the filter box is closed, turn
off the machine, take off all the alimentations and
call for assistance.
TEMPERATURE PROBE
The temperature probe is broken: the machine
stops and the buzzer rings. Press STOP to stop
the sound signal; the display will show "SELECT".
The machine is ready for operation, If the alarm
rings again, take off all connections and call
technical assistance
BLOCK THERMIC MOTOR
One of the motor is overheated: the machine stop
and the buzzer rings. Pressing STOP the alarm
disappears and on the display appears "SELECT
A PROGRAM". Wait for few seconds until the
motors cool down. Rearm thermal cutout and start
the machine. If the signal persists switch off the
machine, take off all the feedings and call
technical assistance
FLAME OFF
It appears only in machines with gas heating.
Three consecutive attempts of lighting of burner
have failed. The buzzer rings and the machine
stops. Pressing STOP the alarm disappears and
14
26/11/04