Whirlpool Cabrio,- WED7300X Manuel d'utilisation et d'entretien - Page 10

Imprimer la page

Whirlpool Cabrio,- WED7300X Manuel d'utilisation et d'entretien

Spin Speed

This washer automatically selects the spin speed based on the

cycle selected. The preset speeds can be changed. Spin speeds

may vary by cycle.

Faster spin speeds mean shorter dry times.

Slower spin speeds mean less wrinkling.

Wash-Rinse Temp

Select a water temperature based on the type of load you are

washing. Use the warmest wash water safe for fabrics. Follow

garment label instructions.

Warm rinses leave the loads drier and more comfortable to handle

than with cold rinses. However, warm rinses also increase

wrinkling. Cold rinses may help with wrinkling and save energy.

Temperature Guide

Wash Water Temperature

Hot

Warm

Cold

NOTE: In wash water temperatures colder than 60°F (15.6°C),

detergents do not dissolve well. Soils may be dif cult to remove.

Care Control Temperature Management

Care Control Temperature Management electronically senses

and maintains a uniform wash and rinse water temperature.

Care Control regulates incoming hot and cold water and is

automatically turned on when a cycle is selected. (See

"Preset Cycle Settings" in "Cycles.")

Care Control is available with Warm/Warm, Warm/Cold, and

Cold/Cold settings. The water temperature in the Hot/Cold and

Tap Cold/Cold settings depends on the water temperature at the

water inlet faucets.

Care Control ensures consistent cleaning.

The Hot and Warm setting on this washer will be cooler than

you are accustomed to. Wash temperatures in this ENERGY

STAR

quali ed washer are lower than temperatures you may

be used to in conventional washers. Heated water consumes

the largest amount of energy that a washer uses.

Today's detergents work well at temperatures above 60°F

(15.6°C).

Delay Wash (on some models)

You can use the Delay Wash feature to delay the start of a wash

cycle for up to 10 hours (depending on your model).

1. Load the washer and ll the dispensers.

2. Close the washer lid.

3. Press POWER.

4. Select the desired Cycle, Modi ers, and Options.

5. Press DELAY WASH. 1H (one hour) will be displayed in the

time display window. The indicator light for Delay Wash will

glow.

6. For a longer delay time, press DELAY WASH. The Start time

will increase by 1-hour steps.

7. Press START. The countdown in hours to the wash cycle will

show in the time display window and the indicator light will

begin to ash.

NOTE: The Start indicator light will not ash when Delay Wash

is chosen. You must press Start to initiate a countdown for the

cycle to begin.

Suggested Colors

Whites and pastels

Bright colors

Colors that bleed or fade

To change the Delay Wash time:

Press PAUSE/CANCEL.

Press DELAY WASH to select the desired delay time.

Press START to begin the countdown.

To cancel Delay Wash:

Press START again to begin the cycle right away or press

PAUSE/CANCEL twice.

Use these pads to select the desired options for your wash cycle.

Deep Clean

This option provides enhanced cleaning action for tough stains.

The Heavy Duty cycle automatically includes Deep Clean.

Choosing Deep Clean will add approximately 5 minutes to a cycle.

Deep Clean should be started on a dry load only and cannot be

selected after the tub has started lling with water.

Deep Clean may be selected as an option with other cycles. See

table for details.

Cycle

Whitest Whites

Heavy Duty

Bulky Items/

Comforters

Sheets

Normal

Casual/Perm Press

Colors/Towels

Quick Wash

Wool

Delicate/Handwash

Soak

Rinse & Spin

Drain & Spin

Clean Washer

Options

Deep Clean

(Adds time to the wash cycle)

Option

Default

Not available

Option

Not available

Option

Not available