Whirlpool Cabrio,- WED7300X Manuel d'utilisation et d'entretien - Page 4

Imprimer la page

Whirlpool Cabrio,- WED7300X Manuel d'utilisation et d'entretien

CONTROL PANEL AND FEATURES

Not all features and cycles are available on all models.

POWER BUTTON

Press to turn the washer ON. Pressing once while the

washer is on will cancel the current cycle, pressing twice

will turn the washer OFF.

WASH CYCLE KNOB

Turn the Wash Cycle Knob to select a cycle for your laundry

load. See "Cycle Guide" for detailed descriptions of cycles.

TIME/STATUS DISPLAY

The Estimated Time Remaining display shows the time

required for the cycle to complete. Factors such as load size

and water pressure may affect the time shown in the display.

Overloading, unbalanced loads, or excessive suds may

cause the washer to adjust the cycle time, as well.

The Delay Wash indicator will light if you have set a delay

start to the cycle.

The Add a Garment indicator will let you know when it is still

possible to add items to the load.

When the cycle is complete, the Done indicator will light until

the lid is opened.

ECO MONITOR

Your washer is specially designed to conserve energy

and water. Each cycle, along with any selected options, will

result in different energy and water usage. To use the Eco

Monitor, choose the best cycle for the load being washed,

then adjust temperature and spin speed options to improve

the energy usage within that cycle.

START/PAUSE BUTTON

Press to start the selected cycle; press again to pause

a cycle.

CYCLE SIGNAL BUTTON

Use this option to adjust volume of the signal that sounds at

end of cycle. A louder signal is helpful in removing items as

soon as cycle is complete.

LID LOCK INDICATOR

This light indicates that the lid is locked and cannot be

opened. If you need to open the lid, press START/PAUSE.

The lid will unlock once the washer movement has stopped.

This may take several minutes if the load was spinning at

high speed. Press START/PAUSE again to restart the cycle.

FABRIC SOFTENER DISPENSER SELECTOR

Press this button to set the Fabric Softener dispenser to

automatically add liquid Fabric Softener to the load at the

correct time.

CYCLE OPTIONS

When you select a cycle, its default settings will light up.

SOIL LEVEL

Soil level (wash time) is preset for each wash cycle.

As you press the Soil Level pad, the cycle time (minutes)

will increase or decrease in the Estimated Time Remaining

display and a different wash time will appear.

For most loads, use the soil level that is preset with the

cycle you have chosen. For heavily soiled and sturdy

fabrics, press Soil Level to select more wash time, if

needed. For lightly soiled and delicate fabrics, press

Soil Level to select less wash time, if needed. A lower

soil level setting will help reduce tangling and wrinkling.

SPIN SPEED

This washer automatically selects the spin speed

based on the cycle selected. The preset speeds can be

changed. Not all spin speeds are available with all cycles.

• Faster spin speeds mean shorter dry times, but may

• Slower spin speeds mean less wrinkling, but will leave

TEMP

Temperature Control senses and maintains uniform

water temperatures by regulating incoming hot and

cold water.

Select a wash temperature based on the type of fabric

and soils being washed. For best results and following the

garment label instructions, use the warmest wash water

safe for your fabric.

• Warm and hot water will be cooler than what your

• Even for cold wash settings, some warm water may

increase wrinkling in your load.

your load more damp.

previous washer provided.

be added to the washer to maintain a minimum

temperature.