Whirlpool Cabrio,- WED7300X Manuel d'utilisation et d'entretien - Page 5

Imprimer la page

Whirlpool Cabrio,- WED7300X Manuel d'utilisation et d'entretien

Control Panel and Features

Not all features and cycles are available on all models.

NOTE: The control panel features a sensitive surface that responds to a light touch of your nger. To ensure your selections are

registered, touch the control panel with your nger tip, not your ngernail. When selecting a setting or option, simply touch its name

until the desired section is illuminated.

POWER BUTTON

Touch to turn the washer ON. Touching once while the

washer is on will cancel the current cycle, touching twice

will turn the washer OFF.

WHAT TO WASH

Use these options to describe the type of items you are

loading into the washer. See "Cycle Guide" for detailed

descriptions of options.

ADD GARMENT

When Add Garment is lit, you may pause the washer, open

the lid, and add items. Touch and hold START to start the

washer again.

TIME/STATUS DISPLAY

The Estimated Time Remaining display shows the time

required for the cycle to complete. Factors such as load

size and water pressure may affect the time shown in

the display. Tightly packed loads, unbalanced loads, or

excessive suds may cause the washer to adjust the cycle

time, as well.

If you have set a delay start to the cycle, the Estimated

Time Remaining display will show the delay time adjusted.

When the cycle is complete, the Done indicator will light

until the lid is opened.

The Lid Lock indicator lights up when the lid is locked

and cannot be opened. If you need to open the lid,

touch START/PAUSE. The lid will unlock once the washer

movement has stopped. This may take several minutes

if the load was spinning at high speed. Touch START/

PAUSE again to restart the cycle.

HOW TO WASH

Use these options to describe the method of washing your

load. See "Cycle Guide" for detailed descriptions.

START/PAUSE BUTTON

Touch START to begin the selected cycle; touch again to

pause a cycle.

OPTIONS

You may add or remove options for each cycle. Not all

options can be used with all cycles, and some are preset

to work with certain cycles.

DELAY START

Touch Delay Start to delay the start of the wash cycle by

up to 12 hours. Touch Delay Start until a "0" appears in

the status display to turn off, or touch POWER.

END BEEP

End Beep signals that a cycle has completed.

STEAM CLEAN

The Steam Clean option adds additional soak and wash

time to many cycles to help remove tough stains, as well

as a steam boost for added cleaning power. Steam Clean

uses a heater within the washer to maintain the selected

temperature setting throughout the wash period. Steam

Clean may be selected as an option with other cycles.

ADDITIVES - OXI

Select the Oxi option so that it is added to the load at the

correct time.

UTILITY TOOLS

Clean Washer

Use this every 30 washes to keep the inside of your

washer fresh and clean. This cycle uses a higher water

level. Use with affresh

chlorine bleach to thoroughly clean the inside of your

washer. This cycle should not be interrupted. See

"Washer Care."

IMPORTANT: Do not place garments or other items

in the washer during the Clean Washer cycle. Use this

cycle with an empty wash tub.

Rinse & Spin

Combines a rinse and high speed spin for loads

requiring an additional rinse cycle or to complete

a load after power interruption. Also use for loads

that require rinsing only.

Washer Cleaner tablet or liquid