Whirlpool CGM2793BQ Manuel d'instructions d'installation - Page 22
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Whirlpool CGM2793BQ. Whirlpool CGM2793BQ 48 pages. Commercial dryer gas or electric
Également pour Whirlpool CGM2793BQ : Manuel d'instructions d'installation (48 pages)
Imprimer la page
ELECTRIC DRYER ELECTRICAL
CONNECTIONS
(FOR
U.S.A.
ONLY)
Connecting
3=Wire Connection:
Optional
Use for direct wire or power supply cord where Ideal codes
do not permit connecting cabinet=ground
conductor to
neutral wire.
Connecting
Neutral Wire
1. Remove center terminal block screw (A). Also remove
neutral ground wire (B) by removing green external ground
conductor screw (C).
3. Connect remaining wires under outer terminal block screws
(F). Tighten screws.
!
F
2. Connect neutral ground wire (B) and neutral wire (white or
center wire) (D) of power supply cord/cable under center
terminal block screw (A). Tighten screw.
_A
4. Connect a separate copper ground wire (G) under the green
external ground conductor
screw (C) to an adequate ground.
Finally, reinstall terminal block to dryer rear panel. Secure
cover with hold-down
screw.
LEVELING
Leveling your dryer properly reduces excess noise and vibration.
Excessive
Weight Hazard
Use two or more people to move and install
dryer,
Failure to do so can result in back or other injury.
Not Level
LEVEL
Not Level
1. Remove cardboard from beneath dryer. Place a level on top
edges of dryer, checking each side and front. If not level,
tip dryer and adjust legs up or down as shown in Step 3,
repeating as necessary.
£
22