Whirlpool CSP2760TQ3 Manuel d'instructions d'installation - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Whirlpool CSP2760TQ3. Whirlpool CSP2760TQ3 36 pages. Commercial stacked dryer gas (120-volt,60-hz)or electric (120/240-volt,60-hz)

Imprimer la page

WARNING

- ".isk ofFire"

- Clothes dryer installation

must be performed

by a qualified

installer.

- Install the clothes dryer according

to the manufacturer's

instructions

and local codes.

- Do not install a clothes dryer with flexible

plastic venting materials,

if flexible

metal

(foil type) duct is installed,

it must be of a specific

type identified

by the appliance

manufacturer

as suitable for use with clothes dryers. Flexible venting materials

are

known to collapse,

be easily crushed,

and trap lint. These conditions

will obstruct

clothes dryer airflow and increase

the risk of fire.

- To reduce the risk of severe injury or death, follow

all installation

instructions.

- Save these instructions.

WARNING:

For your safety, the information

in this manual

must be followed

to minimize

the risk of fire or explosion,

or to prevent

property

damage,

personal

injury, or death,

- Do not store or use gasoline or other flammable

vapors and liquids in the vicinity of this

or any other appliance.

- WHAT TO DO iF YOU SMELL GAS:

® Do not try to light any appliance.

• Do not touch any electrical switch; do not use any phone in your building.

• Clear the room, building, or area of all occupants.

= Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's

instructions.

• if you cannot reach your gas supplier, call the fire department.

- Installation and service must be performed by a qualified

installer, service agency, or

the gas supplier.

WARNING: Gas leaks cannot always be detected by smell.

Gas suppliers recommend

that you use a gas detector approved

by UL or CSA.

For more information,

contact your gas supplier.

If a gas leak is detected,

follow the "What to do if you smell gas" instructions.

IMPORTANT: The gas installation must conform with local codes, or in the absence of local codes, with the National Fuel Gas

Code, ANSI Z223.1/NFPA 54 or the Canadian Natural Gas and Propane Installation Code, CSA B149.1.

The dryer must be electrically grounded in accordance with local codes, or in the absence of local codes, with the National

Electrical Code, ANSI/NFPA 70 or Canadian Electrical Code, CSA C22.1.