Whirlpool DryAire LMA1053LT Manuel - Page 22
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Whirlpool DryAire LMA1053LT. Whirlpool DryAire LMA1053LT 32 pages. Drying cabinet
Imprimer la page
PANEL-MOUNTED TERMINAL BLOCK
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
NOTE: Sharp edges may be present.
1.
Disconnect the power to the drying cabi-
net.
2.
Remove the component panel (see page
4-2 for the procedure).
3.
Remove the two mounting screws and
lockwasher from the shield and remove
the shield from the component panel.
Shield
Screw
REMOVING THE COMPONENT
Screw &
Lockwasher
Terminal
Block
4.
Loosen the 3 wire screws and pull the
wires out of the component panel-mounted
terminal block.
5.
Remove the two screws from the compo-
nent panel-mounted terminal block, and
remove the block from its mounting bracket.
Terminal Block Screws
WARNING
Electrical Shock Hazard
Connect ground wire to ground screw.
Failure to do so can result in death or
electrical shock.
4-8
Ground Wire
3 Wire Screws