Whirlpool Duet WED9150WW0 Manuel d'instructions d'installation - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Whirlpool Duet WED9150WW0. Whirlpool Duet WED9150WW0 16 pages. 27" electric dryer
Également pour Whirlpool Duet WED9150WW0 : Manuel d'utilisation et d'entretien (25 pages)
Imprimer la page
4oWIRE
FOWER
$UFFLY
CORD
CONNECTION
Choose a standard
power supply cord connector:
Connect
remaining
wires
e
Flanged spade connectors
Ring connectors
Prepare to connect
neutral
ground
wire and neutral
wire.
Remove center, silver-colored
terminal block screw. Remove
neutral ground wire from external ground conductor screw.
Connect remaining wires to outer terminal block screws.
Tighten screws. Finally, reinsert tab of terminal block cover into
slot of dryer rear panel. Secure cover with hold-down
screw.
Now, go to Venting Requirements.
3oWIRE
FOWER
$UFFLY
CORD
CONNECTION
Choose a standard power supply cord connector:
Connect
neutral
ground
wire
and neutral
wire
Connect neutral ground wire and neutral wire (white or center
wire) of power supply cord under center, silver-colored
terminal block screw. Tighten screw.
9, Connect
ground
wire
Connect ground wire (green or bare) of power supply cord
to external ground conductor
screw. Tighten screw.
8
Flanged spade connectors
Ring connectors
[
I 1 1, Remove
center
screw
Remove center, silver-colored
terminal block screw.
_12.
C onnectneutralwire
._;
Connect neutral wire (white or center wire) of power supply cord
to center, silver-colored
screw on terminal block. Tighten screw.