Whirlpool FT M10 71Y EU Manuel rapide - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel rapide pour {nom_de_la_catégorie} Whirlpool FT M10 71Y EU. Whirlpool FT M10 71Y EU 4 pages.

Imprimer la page

Quick guide

THANK YOU FOR BUYING A INDESIT PRODUCT.

CARE AND MANTENANCE

In order to receive a more complete assistance,

please register your product on

Unplug the dryer during the cleaning and maintenance

www.indesit.eu/register

procedures.

Emptying the water tank after each

cycle (see Fig. A).

Pull the container out of the dryer and and empty it into a

sink or other suitable drain, then place it back. Do not use the dryer

without having inserted the container back in place.

Cleaning the primary door filter after each cycle (see Fig. B).

After each cycle, pull the primary door filter out and clean it by

removing the lint from the filter surface under running water or

using a vacuum cleaner.

Cleaning the secondary door filter when the relevant

indicator turns on (see Fig. C).

Pull the secondary door filter out and clean it in all its parts by

washing it under running water or using a vacuum cleaner.

For optimal performance, dry up all the filters before inserting

them back in place.

Do not use the dryer without having inserted all filters back

in place properly first.

The filters are essential parts for drying. They are intended

to collect the lint formed during drying process. In case

of clogged filters, the air flow inside the dryer would be

seriously affected: the drying times would be longer, the

energy consumption would increase and the dryer could be

damaged. If these procedures are not carried out properly,

the dryer may not start.

Autoclean

The maintenance of the bottom filter of this model is

automatic. The dryer carries out cleaning when the sensors signal

the need to do so. In this case, the machine goes on working even

when the drying cycle is completed. An indicator on the control

panel will signal the maintenance. Do not switch the machine off

during this phase.

TRANSPORT AND HANDLING

Never lift the dryer by holding it at the worktop.

1. Unplug the dryer.

2. Make sure that door and water tank are properly closed.

3. If the drain hose is connected to your sewage system, fix the

drain hose on the rear of the dryer again (see Installation

PRODUCT DESCRIPTION

Water Tank

Air Intake

Door filter

B primary

C secondary

You can download the Safety Instructions, User Manual, Product Fiche and Energy data by:

• Visiting our website -

• Using QR Code

• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When

contacting our After-sales Service, please state the codes provided on your product's identifi cation plate.

docs.indesit.eu

Before using the appliance carefully read the Safety Instructions.

Power consumption

off-mode (Po) - Watts

left-on mode (Pl) - Watts

Programs

Eco Cotton *

Eco Cotton

Synthetics

*This is the reference programme for the energy label and suitable to

dry normal wet cotton laundry. This is the most efficient programme

in terms of energy consumption for drying wet cotton laundry.

(Standard/Default starting configuration)

Heat Pump System

Guide)..

The heat pump contains fluorinated greenhouse gases,

contained in a hermetically sealed unit. This sealed unit contains

0.15

kg of the F gas R134a. GWP = 1430 (1 t CO2).

kWh

2.27

3.5

1.25

1.02

0.50

1.00

Minutes

197

116

101

xxxx

xxxxxxxxxxxx