Whirlpool WGD8500DC Manuel d'instructions d'installation - Page 24
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Whirlpool WGD8500DC. Whirlpool WGD8500DC 44 pages. Gas and electric
Également pour Whirlpool WGD8500DC : Manuel d'utilisation et d'entretien (40 pages)
Imprimer la page
5. Remove the door strike plug with a flathead screw driver.
Remove door strike by pinching the clips from the inside door
panel and then rotate and push out the front. Insert door strike
on the other side of dryer door by pushing in and then add the
door strike plug.
6. Remove the door hinges and set off to the side.
7. Remove the 3 screws down the left and right sides of the door
to remove the outer trim pieces.
24
8. Lift door up and rotate trim pieces to the opposite side they
were removed from. Then screw trim pieces back in.
9. Add the hinges to the right side of the door and then flip the
hinge labeled 1 to the bottom of the right side and the hinge
labeled 2 to the top of the right side of the door.