Whirlpool WGD85HEFC1 Manuel d'instructions d'installation - Page 22

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Whirlpool WGD85HEFC1. Whirlpool WGD85HEFC1 25 pages. Gas dryer/canadian electric dryer

Imprimer la page

Reverse door swing round-shaped door curved glass – double handle

Remove door from dryer

IMPORTANT: If the protective film has not yet been

removed from the dryer, peel the film from the dryer door

before proceeding.

Using a T25

screwdriver, remove the 4 screws securing the

door hinge to the dryer and lift up and out to remove the door.

Place the door on a soft towel or other non-scratch surface.

Reinstall the 4 screws in the holes.

Move the door strike

Using a T25

screwdriver, remove the 2 screws securing the

door strike to the door frame of the dryer. Rotate the strike

180° and attach to the opposite side of dryer door frame

as shown.

Remove inner door from outer door

Position the door with the inside of the door facing up.

Using a Phillips screwdriver, remove the 10 screws securing

the inner door to the outer door. Lift off the inner door and

set aside.

Remove hinge and latch

Using a T25

screwdriver, remove the 3 screws securing the

latch plate and latch backing plate and the 5 screws holding

the hinge assembly in place.

Latch

Hinge