Whirlpool WGD9400SB - Duet HT - 27in Gas Dryer Manuel d'utilisation et d'entretien - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Whirlpool WGD9400SB - Duet HT - 27in Gas Dryer. Whirlpool WGD9400SB - Duet HT - 27in Gas Dryer 48 pages. Whirlpool canada lp electronic gas dryer use & care guide

Whirlpool WGD9400SB - Duet HT - 27in Gas Dryer Manuel d'utilisation et d'entretien

Tools and Parts

Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
8" or 10" pipe wrench
8" or 10" adjustable
wrench (for gas
connections)
Flat-blade screwdriver
Adjustable wrench that
opens to 1" (2.5 cm) or
hex-head socket wrench
(for adjusting dryer feet)
" nut driver or socket
wrench
Parts supplied
Remove parts packages from dryer drum. Check that all parts are
included.
Parts package
4 Leveling legs
NOTE: Do not use leveling legs if installing the dryer on a
pedestal.
Parts needed
Check local codes and with gas supplier. Check existing gas
supply, electrical supply and venting. Read "Electrical
Requirements," "Gas Supply Requirements" and "Venting
Requirements" before purchasing parts.
For close-clearance installations between 31.5" (80.01 cm)
and 37" (93.98 cm), see "Plan Vent System" section for
venting requirements.
Mobile home installations require special parts (listed following)
that may be ordered by calling the dealer from whom you
purchased your dryer. For further information, please refer to the
"Assistance or Service" section of this manual.
Mobile Home Installation Kit. Ask for Part Number 346764.
Metal exhaust system hardware.

INSTALLATION INSTRUCTIONS

Level
Knife
Vent clamps
Pipe-joint compound
resistant to LP gas
Caulking gun and
compound (for installing
new exhaust vent)
Pliers
Tape measure
37"
(93.98 cm)

Options

Pedestal
Are you placing the dryer on a pedestal? You have the option of
purchasing pedestals of different heights separately for this dryer.
You may select a 10" (25.4 cm) or 15.5" (39.4 cm) pedestal.
These pedestals will add to the total height of the dryer for a total
height of approximately 48" (121.9 cm) or 53.5" (135.9 cm),
respectively.
For a garage installation, you will need to place the 10" (25.4 cm)
pedestal at least 9" (22.9 cm) above the floor and the
15.5" (39.4 cm) pedestal at least 3.5" (8.9 cm) above the floor.
A
A. 10" (25.4 cm) pedestal
B. 15.5" (39.4 cm) pedestal
The pedestals are available in several colors.
To order, call the dealer from whom you purchased your dryer or
refer to the "Assistance or Service" section of this manual.
Pedestal
Color
Height
10" (25.4 cm)
White
10" (25.4 cm)
Biscuit
10" (25.4 cm)
Diamond Dust
(Silver)
10" (25.4 cm)
Black Diamond
15.5" (39.4 cm)
White
15.5" (39.4 cm)
Biscuit
15.5" (39.4 cm)
Diamond Dust
(Silver)
15.5" (39.4 cm)
Black Diamond
Stack Kit
Are you planning to stack your DUET
so, you will need to purchase a Stack Kit.
To order, call the dealer from whom you purchased your dryer or
refer to the "Assistance or Service" section of this manual. Ask
for Part Number 8541503.
B
Part Number
WHP1000SQ
WHP1000ST
WHP1000SU
WHP1000SB
WHP1500SQ
WHP1500ST
WHP1500SU
WHP1500SB
®
washer and dryer? To do
5