Whirlpool WGD9450WR Manuel d'instructions d'installation - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Whirlpool WGD9450WR. Whirlpool WGD9450WR 32 pages. Gas/electric

Imprimer la page

ELECTRIC DRYER POWER HOOKUP-

CANADA ONLY

Electrical Requirements

Electrical Shock Hazard

Plug into a grounded 4 prong outlet.

Failure to do so can result in death or electrical shock.

It is your responsibility

•

To contact a qualified electrical installer.

•

To be sure that the electrical connection is adequate and in

conformance with the Canadian Electrical Code, C22.1-1atest

edition and all local codes. A copy of the above codes standard

may be obtained from: Canadian Standards Association, 178

Rexdale Blvd., Toronto, ON M9W 1R3 CANADA.

•

To supply the required 4 wire, single phase, 120/240 volt,

60 Hz., AC only electrical supply on a separate 30-amp circuit,

fused on both sides of the line. A time-delay fuse or circuit

breaker is recommended. Connect to an individual branch

circuit.

This dryer is equipped with a CSA International Certified Power

Cord intended to be plugged into a standard 14-30R wall

receptacle. The cord is 5 ft (1.52 m) in length. Be sure wall

receptacle is within reach of dryer's final location.

For further information, please reference the service numbers

located in the "Assistance or Service" section.

GROUNDING

iNSTRUCTiONS

[] For a grounded, cord-connected

dryer:

This dryer must be grounded. In the event of malfunction

breakdown,

grounding will reduce the risk of electric shock

by providing a path of least resistance for electric current.

This dryer is equipped with a cord having an

equipment-grounding

conductor and a grounding

plug. The

plug must be plugged into an appropriate

outlet that is

properly installed and grounded in accordance with all local

codes and ordinances.

WARNING:

Improper connection of the

equipment-grounding

conductor can result in a risk of

electric shock. Check with a qualified electrician or service

representative or personnel if you are in doubt as to

whether the dryer is properly grounded. Do not modify the

plug provided with the dryer: if it will not fit the outlet, have

a proper outlet installed by a qualified electrician.

SAVE THESE INSTRUCTIONS

4-wire receptacle 14-30R

If using a replacement power supply cord, it is recommended that

you use Power Supply Cord Replacement Part Number 9831317.