Whirlpool YGEW9250PW Manuel d'utilisation et d'entretien - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Whirlpool YGEW9250PW. Whirlpool YGEW9250PW 40 pages. Electronic electric dryer

Imprimer la page

To use a Manual Cycle

•

Rotate the dial to select a Manual Cycle.

Press MORE TIME or LESS TIME until the desired drying time

is displayed. Tap MORE TIME or LESS TIME and the time will

change by 1-minute intervals. Press and hold MORE TIME or

LESS TIME and the time will change by 5-minute intervals.

The initial time displayed is the actual drying time.

Time

Less

_me

NOTE: The More Time or Less Time feature can be used only

with Manual Cycles.

•

Press TEMPERATURE until the desired temperature

glows.

NOTE: Pressing the Dryness Level button will cause the triple

beep indicating that this option is not selectable. Also, a

Dryness Level is not indicated.

•

Press the WRINKLE SHIELD

feature button if this

option is desired.

•

Press the END OF CYCLE SIGNAL button to set volume

to desired level.

•

Press (and hold) HOLD TO START button until dryer starts

(about 1 second).

While a Manual Cycle is running, you can change the settings

for Time, Temperature, the WRINKLE SHIELD

feature, and

the cycle signals. Press the PAUSE/CANCEL key twice to

stop the dryer and clear the settings, allowing you to select

another cycle.

To unlock:

Press and hold the END OF CYCLE SIGNAL button for 3 seconds

to turn this feature off.

NOTE: When the dryer is running and Control Locked is on, the

dryer can be stopped by pressing the Pause/Cancel button, but

can't be restarted until the control is unlocked.

Properly loading your dryer can lower your utility bill and prolong

the life of your garments.

Loading suggestions

•

Load the dryer by the amount of space items take up, not by

their weight.

•

Do not overload the dryer. This causes wrinkling and uneven

drying.

Super Capacity

Plus Dryers

Heavy Work Clothes

4 jeans

2 sweatpants

4 workpants

2 sweatshirts

4 workshirts

Towels

10 bath towels

10 hand towels

14 washcloths

Mixed Load

3 sheets (1 king, 2 twin)

9 T-shirts

4 pillowcases

9 shorts

3 shirts

10 handkerchiefs

3 blouses

To stop your dryer at any time

Press PAUSE/CANCELtwice or open the door.

To pause the dryer at any time

Open the door or press PAUSE/CANCEL once.

To restart the dryer

Close the door and press (and hold) HOLD TO START button until

dryer starts.

NOTE: Drying will continue from where the cycle was interrupted,

if you close the door and press Start within 5 minutes. If the cycle

is interrupted for more than 5 minutes, the dryer will shut off.

Select new cycle settings before restarting the dryer.

This feature allows you to lock your settings to prevent

unintended use of the dryer. You can also use the Control Locked

feature to prevent unintended

cycle or option changes during

dryer operation.

To enable the Control Locked feature when dryer is

running:

Press and hold the END OF CYCLE SIGNAL button for

3 seconds. The control is locked when a single beep is heard and

the Control Locked status light is on.

•

When the dryer is off, it is not necessary to press the Control

On button before activating the Control Locked feature.

Select the correct cycle and dryness level or temperature for your

load. If an Automatic Cycle is running, the display shows the

estimated cycle time when your dryer is automatically sensing

the dryness level of your load. If a Manual Cycle is running, the

display shows the exact number of minutes remaining in the

cycle.

Cool Down tumbles the load without heat during the last few

minutes of all cycles. Cool Down makes the loads easier to

handle and reduces wrinkling. The length of the Cool Down

depends on the load size and dryness level.

Drying tips

•

Follow care label directions when they are available.

•

If desired, add a fabric softener sheet. Follow package

instructions.

•

Remove the load from the dryer as soon as tumbling stops to

reduce wrinkling. This is especially important for permanent

press, knits, and synthetic fabrics.

•

Avoid drying heavy work clothes with lighter fabrics. This

could cause overdrying of lighter fabrics, leading to increased

shrinkage or wrinkling.

•

If you dry sheets in a mixed load or large items in the Bulky

Items cycle, rearrange the load halfway through the dryer

cycle. This will aid in the drying process.