Whirlpool YWED92HEFC2 Manuel d'instructions d'installation - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Whirlpool YWED92HEFC2. Whirlpool YWED92HEFC2 48 pages.

Imprimer la page

INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation.

Tools needed for all installations:

Flat-blade screwdriver

1/4" (6 mm) and

5/16" (8 mm) nut driver

(recommended)

Tape measure

Utility knife

Caulking gun and

compound (new vent

installations)

#2 Phillips screwdriver

Level

Pliers

Tin snips (new vent

installations)

Adjustable wrench that

opens to 1" (25 mm) or

hex-head socket wrench

Tools needed for gas installations:

8" (203 mm) or 10"

(254 mm) pipe wrench

Pipe-joint compound

resistant to propane gas

Parts supplied (all models):

Leveling legs (4)

Parts needed (steam models):

"Y" connector

Rubber washer

Parts package is located in dryer drum. Check that all parts

are included.

NOTE: Do not use leveling legs supplied with dryer if installing

with a pedestal or a stack kit.

Parts needed (not supplied with dryer):

Vent clamps

■

Vent elbows and vent work

■

8" (203 mm) or 10"

(254 mm) adjustable wrench

(for gas connections)

2' (0.6 m) inlet hose

5' (1.52 m) inlet hose