Whirlpool YWED94HEAC Manuel d'instructions d'installation - Page 20
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Whirlpool YWED94HEAC. Whirlpool YWED94HEAC 22 pages. Gas dryer
Imprimer la page
5.
Reinstall hinge and latch on
opposite sides
Using a TORX
T25
screwdriver, reinstall the latch plate and
®
®
latch backing plate with the 3 TORX
and the hinge assembly with the 5 screws on the opposite
sides from which they were removed.
6.
Reinstall inner door assembly
Position the door with the inside of the door facing up.
Reinstall the 10 screws securing the inner door to the
outer door.
20
screws removed earlier
®
Bottom
of door
7.
Reinstall door on dryer
Using a TORX
T25
screwdriver, remove the 4 screws on the
®
®
dryer. Insert the tabs on the hinge into the mounting slot and
slide down to engage the top tab. Secure in place with
the 4 TORX
T25
screws removed earlier.
®
®
Reverse door swing square-shaped door
1.
Remove door from dryer
Using a TORX
T25
screwdriver, remove the 4 screws
®
®
securing the door hinge to the dryer and lift up and out to
remove the door. Place the door on a soft towel or other
non-scratch surface. Retain or set aside the 4 screws.