Whirlpool 30 " Eye-Level Gas Range Manuel d'instructions d'installation - Page 9

6. Using 2 or more people, place the oven in its upright position.

7. Go to the "Make Electrical Connection" section.

Double Ovens

The positioning of the oven feet allow a double oven to be

installed in a cutout height between 48⁷⁄₈" (124.1 cm) and 52³⁄₁₆"

(132.6 cm). Refer to the following instructions to position the feet

for the size of your cabinet cutout.

Cutout height is between 48⁷⁄₈" (124.1 cm) and 50⁷⁄₁₆"

(128.1 cm)

The oven feet do not need to be installed. The oven is configured

correctly as received.

NOTE: Do not remove the spacers.

Go to the "Make Electrical Connection" section.

A. Spacers

Cutout Height is between 50¹⁄₂" (128.2 cm) and 51¹⁄₈"

(129.9 cm)

1. Using 2 or more people, place the oven on its back on a

covered surface.

2. Install a foot on the left rear spacer using a #8-18 x ³⁄₈" screw.

NOTE: Position the foot so the long side of the foot is facing

toward the top of the oven.

3. In the same manner, install a foot on the right rear of the oven.

4. Install a front foot on the left front spacer using a #8-18 x ³⁄₈"

screw.

NOTE: Position the foot so the long side of the foot is facing

toward the inside of the oven.

5. In the same manner, install a front foot on the right front of the

oven.

A. Spacer

B. Foot

³⁄₈

C. #8-18 x

" screw

A. Front foot

³⁄₈

B. #8-18 x

" screw

C. Spacer