Whirlpool 30" (76.2 CM) AND 36" (91.4 CM) RANGE HOOD Instructions d'installation et manuel d'utilisation et d'entretien - Page 11

Parcourez en ligne ou téléchargez le pdf Instructions d'installation et manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Whirlpool 30" (76.2 CM) AND 36" (91.4 CM) RANGE HOOD. Whirlpool 30" (76.2 CM) AND 36" (91.4 CM) RANGE HOOD 28 pages.

Imprimer la page

Replacing the Incandescent Light Bulb

Turn off the range hood and allow the light bulb to cool.

1. Disconnect power.

2. Squeeze the plastic lens cover and remove it from the hood.

WIRING DIAGRAM

Motor Switch

Off - On

NOTE: Speed 1

not used

C25

Motor Characteristics

Power Supply

120 VAC

Frequency

60 Hz

Amperage

1.2 ±10% A

Wattage Rating

73 ±10% Watts

Motor Resistance

White - Red

17.1 ±10% Ohms

White - Black

13.6 ±10% Ohms

3. Screw a 120V, 75W maximum, incandescent light bulb with

E26 base into the socket.

4. Replace the lens cover by squeezing the cover and inserting

the tabs into the slots.

5. Reconnect power.

If the new light does not operate, make sure the light bulb is

inserted correctly before calling service.

Lamp Switch

Off - Low - High

Lamp Switch

1 - 2

1 - 3 Low

1 - L High

Rectifier

Diode

Ground

Screw

SE114A

GND

Operation

Off