Whirlpool 918 Mode d'emploi - Page 3

Parcourez en ligne ou téléchargez le pdf Mode d'emploi pour {nom_de_la_catégorie} Whirlpool 918. Whirlpool 918 4 pages. Extractor or filtering hood

Imprimer la page

1. Control panel.

a. Light switch.

b. Extraction and minimum extraction speed ON/OFF

switch.

Medium extraction speed switch.

d. Maximum extraction speed switch.

2. Grease filter

3. Grease filter release handle

4. Halogen bulb

5. Steam deflector

6. Telescopic flue

7. Air outlet (for filter version only)

Grease filters:

Metal grease filters have an unlimited life

and should be washed once a month

either by hand or in a dishwasher at a

low temperature and with a short cycle.

Washing in a dishwasher can cause

grease filters to turn white, but this in no

way affects efficiency.

a. press the handle to remove the filter

b. remove it.

Wash the filter and leave it to dry, proceeding in reverse

order to refit it.

Halogen lamps:

Use a small screwdriver or other suitable

tool to prise off the cover. Refit (snap

on).

Only use 20 W max. (12V-G4)

halogen lamps, taking care not to

touch them with hands.

5019 318 33273

H RUS BG RO

Active carbon filter

(filter hoods only):

The carbon filter must be cleaned once a month in a

dishwasher at the highest temperature, using a normal

dishwasher detergent. Wash the filters on their own.

After washing, reactivate the carbon filter by drying it in the

oven at 100°C for 10 minutes.

Change the carbon filter every 3 years.

Fitting the carbon filter:

1. Remove the grease filter.

2. Remove the filter holder by turning the knobs 90°.

3. Fit the carbon filter "i" in the filter holder "h".

Reverse the above procedure to re-fit the filter holder and

grease filter.