Whirlpool AKR 811 WH Manuel d'instructions de sécurité importantes - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions de sécurité importantes pour {nom_de_la_catégorie} Whirlpool AKR 811 WH. Whirlpool AKR 811 WH 7 pages. 85cm "glamour" flat screen hood in white akr 811 wh
Imprimer la pageTROUBLESHOOTING GUIDE
The appliance does not work:
•
Check for the presence of mains electrical power and if the appliance is connected to the electrical supply.
•
Turn off the appliance and restart it to see if the fault persists.
The hood's suction level is not sufficient:
•
Check the suction speed and adjust as necessary:
•
Check that the filters are clean:
•
Check the air vents for any obstructions.
The light does not work;
•
Check the light bulb and replace if necessary;
•
Check that the light bulb has been correctly fitted.
AFTER-SALES SERVICE
Before calling the After-Sales Service:
1. See if you can solve the problem yourself with the help of the suggestions given in the "Troubleshooting guide".
2. Switch the appliance off and back on again it to see if the fault persists.
If after the above checks the fault still occurs, get in touch with the nearest After-sales Service.
Always specify:
•
a brief description of the fault;
•
the exact type and model of the appliance;
•
the service number (number after the word Service on the rating plate), located on the inside of the appliance. The service number is also indicated on the
guarantee booklet;
•
your full address;
•
your telephone number.
If any repairs are required, please contact an authorised After-sales Service (to guarantee that original spare parts will be used and repairs carried out correctly).
CLEANING
WARNING
IMPORTANT: do not use corrosive or abrasive detergents. If any of these products accidentally comes into contact with the appliance, clean
immediately with a damp cloth.
•
Clean the surfaces with a damp cloth. If it is very dirty, add a few drops of washing up detergent to the water. Finish off with a dry cloth.
IMPORTANT: do not use abrasive sponges or metallic scrapers or scourers. Over time, these can ruin the enamel surface.
•
Use detergents specifically designed for cleaning the appliance and follow the manufacturer instructions.
IMPORTANT: In order to avoid product damages, do not spray cleaners directly to the control while cleaning the Hood.
IMPORTANT: clean the filters at least monthly to remove any oil or grease residuals.
- Never use steam cleaning equipment.
- Disconnect the appliance from the power supply.
GB10