Whirlpool INAC700W Manuel d'installation et d'utilisation - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Whirlpool INAC700W. Whirlpool INAC700W 25 pages.
Imprimer la page
1.
Find a suitable installation position of hood which should be next to a window
and can be cut to let the exhaust duct pass through. Mark the location of
exhaust outlet hole, the cut/drill the hole with care.
2. If the exhaust duct has to pass through the wall,particular attention must be
paid to the structure of the wall as steel reinforcement may be embedded.
3. Adjust the hanging hooks on both sides of the hood and hang the hood on
the steel nails, and then adjust the hood from side to side and from front and
back to a horizontal position.
4. Follow the instruction print on the enclosed exhaust duct adapter and connect
the exhaust duct adapter to the hood and window/wall 5-inch or 6-inch duct
can be used.
Cabinet cut-out size
Built-in hood is designed for installing under a kitchen cabinet. Below cut-out
size is for side mounting.
# lnstallation dimension of the hood to align with the housing of kitchen cabinet
* lnstallation dimension of the hood to align with the door of the kitchen cabinet
Cabinet
back plate
MIN
450
300
P
ROCEDURE
Cabinet /plywood
M
OUNTING
Ø210
Cabinet
back plate
MIN
330
INAC700=675
INAC900=860
5
Exhaust duct
Keeps the hood in level to
avoid the oil leaking from oil cup.
M
ETHOD
#215/*195
295
#30/*10
Level
Tilted
Top view of cabinet
Ø210
#215/*195
unit:mm