Whirlpool RH8336 SERIES Instructions d'installation et manuel d'utilisation et d'entretien - Page 6

Parcourez en ligne ou téléchargez le pdf Instructions d'installation et manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Whirlpool RH8336 SERIES. Whirlpool RH8336 SERIES 7 pages.

Imprimer la page

WARNING

Electrical Shock Hazard

Disconnect power before making

electrical connections.

Connect ground wire to green ground

screw in terminal box.

Failure to do so can result in death or

electrical shock.

to light

ground

bulbs

wires

power

white wires

supply

wiring

18a.

For models requiring direct wiring:

Connect white wiring from the terminal box,

light harness and power supply wiring

together with twist-on connector.

Connect black wiring from the terminal box

to power supply wiring with twist-on

connector.

Connect the power supply ground wire and

the green ground wire inside the terminal

box under the terminal box ground screw.

Use caulking to seal wire opening.

Replace terminal box cover.

For cord connected models:

WARNING

Electrical Shock Hazard

Plug into a grounded 3-prong outlet.

Do not remove ground prong.

Do not use an adapter.

Failure to follow these instructions can

result in death, fire, or electrical shock.

For your personal safety, this range hood

must be grounded. To minimize possible

shock hazard, the cord must be plugged

into a mating, 3-prong, ground-type outlet,

grounded in accordance with National

Electrical Code, ANSI/NFPA 70 – latest

edition* and all local codes and

ordinances.

If mating outlet is not available, it is the

responsibility and obligation of the

customer to have a properly grounded, 3-

prong outlet installed by a qualified

electrician.

Do not use an extension cord.

Using a U.L.-listed power supply

cord-connection kit:

Follow Power Cord Kit instructions for

connecting wiring.

Replace terminal box cover.

19a.

Turn power supply on.

Copies of standards listed may be obtained from:

* National Fire Protection Association

Batterymarch Park

Quincy, Massachusetts 02269

Panel E

Use & Care

Information

Use this range hood only in the manner

intended by the manufacturer. If you have

any questions, contact the manufacturer.

Before installation and before servicing or

cleaning range hood, switch off power at

service panel and lock service panel to

prevent power from being switched on

accidentally. When the service

disconnecting means cannot be locked,

securely fasten a prominent warning

device, such as a tag, to the service panel.

Operation of

range hood

For best results, turn range hood fan on at

beginning of cooking and allow it to run

until all smoke and odors are removed from

room.

terminal

To adjust fan speed:

box

Turn fan speed control to desired setting

connector

between "Hi" and "Lo". Speed may be

blower

wiring

changed anytime during range hood

connector

operation.

black wires

To turn range hood light "ON" and "OFF":

Turn light control to operate light "ON" or

"OFF". Light may be turned to "OFF" or

"ON" anytime during range hood

twist-on

operation.

connectors

"Night" light setting:

Turn light control to "Night" setting when

you need the light dimmed for use as a

night light.

Care of range hood

Filters:

For best results, remove and clean often.

holes

filters

To remove aluminum filters:

Place finger in hole. Pull back and down.

To clean aluminum filters:

Place filters in dishwasher or hot sudsy water

to clean.

To reinstall aluminum filters:

Place edge of filter in channel opening so

that side is above flange. Pull back. Press

filter into position.

When it's time to replace your

aluminum filter:

1. Choose your filter order number.

30" Hood Model RH8330:

Order Filter no. 883276

36" Hood Model RH8336:

Order Filter no. 883277

2. Call Whirlpool's Telesales line at

1-800-442-9991

3. Give the Telesales Representative the

part number needed.

4. The Representative will give you the

current price.

5. Place your order using your Master

Card

, Visa

or Discover

6. If you wish: mail a check or money order

to:

Whirlpool Corporation

1900 Whirlpool Drive

LaPorte, IN 46350-9980

Attn: Accessory Accounting

7. Be sure to ask the Telesales

Representative about the wide variety of

other Whirlpool Product Accessories.

Blower motor:

To clean blower motor:

Clean exterior of motor with a damp cloth

and grease-cutting detergent.

Exterior surfaces:

Clean the range hood with a mild

detergent and soft cloth. Do Not use

abrasive cleaners or steel wool.

Light:

Do Not use bulbs larger than 60 watts

in light sockets.

To replace bulbs:

Remove three screws that hold light cover

panel in place. Remove panel and set

aside. Replace bulb.

Replace light cover panel before operating

fan or light.

Light bulbs are not included.

credit card.