Whirlpool UXT4230ADB0 Instructions d'installation et manuel d'utilisation et d'entretien - Page 11
Parcourez en ligne ou téléchargez le pdf Instructions d'installation et manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Whirlpool UXT4230ADB0. Whirlpool UXT4230ADB0 28 pages. 30" (76.2 cm) and 36" (91.4 cm) range hood
Imprimer la page
Replacing
the Incandescent
Light Bulb
Turn off the range hood and allow the light bulb to cool.
1. Disconnect
power.
2. Squeeze the plastic lens cover and remove it from the hood.
3. Screw a 120V, 75W maximum, incandescent
light bulb with
E26 base into the socket.
4. Replace the lens cover by squeezing the cover and inserting
the tabs into the slots.
5. Reconnect power.
If the new light does not operate, make sure the light bulb is
inserted correctly before calling service.
WIRING DIAGRAM
Motor Switch
Off- On
rr"
f_
_
I NOTE:Speed 1
I_
g_ _T'I
notused
MotorCharacteristics
PowerSupply
120 VAC
Frequency
60 Hz
Amperage
1.2 _+10%A
Wattage Rating
73 +10% Watts
Motor Resistance
White- Red
I 17.1 +_10%Ohms
Lamp Switch
Off- Low- High
;;I
1-2
1-3
1-L
Rectifier
Diode
bLI
F'q
Lamp Switch
Operation
Off
Low
High
Ground
Screw
GND
\
[SE114A
11