Whirlpool UXT5236AY Instructions d'installation et manuel d'utilisation et d'entretien - Page 13

Parcourez en ligne ou téléchargez le pdf Instructions d'installation et manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Whirlpool UXT5236AY. Whirlpool UXT5236AY 34 pages. 30" (76.2 cm) and 36" (91.4 cm) range hood
Également pour Whirlpool UXT5236AY : Instructions d'installation et manuel d'utilisation et d'entretien (36 pages), Instructions d'installation et manuel d'utilisation et d'entretien (32 pages), Instructions d'installation et manuel d'utilisation et d'entretien (32 pages)

To Replace the Filter:

1. To reinstall the filter, the single slot opening on the long edge

of the filter is to be toward the front of the range hood. Place

the back edge of the filter into the channel at the rear of the

range hood.

2. Pull the filter retainer toward the front of the range hood and

push the front of the filter up into place.

3. Release the filter retainer. It will spring back into place to

secure the filter.

4. Replace the screw into the filter retainer.

Replacing a Halogen Lamp

Turn off the range hood and allow the halogen lamp to cool. To

avoid damage or decreasing the life of the new lamp, do not

touch lamp with bare fingers. Replace lamp, using tissue or

wearing cotton gloves to handle lamp.

If new lights do not operate, make sure the lamps are inserted

correctly before calling service.

1. Disconnect power.

2. Use a flat-blade screwdriver and gently pry the light cover

loose.

3. Remove the lamp and replace with a 120-volt, 40-watt

maximum, halogen lamp made for a G-9 base.

4. Replace the light cover.

5. Reconnect power.