Whirlpool WVW75UC6DS Instructions d'installation et manuel d'utilisation et d'entretien - Page 13

Parcourez en ligne ou téléchargez le pdf Instructions d'installation et manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Whirlpool WVW75UC6DS. Whirlpool WVW75UC6DS 32 pages. 36" (91.4 cm) island-mount canopy range hood
Également pour Whirlpool WVW75UC6DS : Manuel d'utilisation et d'entretien Instructions d'installation (28 pages), Instructions d'installation et manuel d'utilisation et d'entretien (28 pages)

The range hood is designed to remove smoke, cooking

vapors and odors from the cooktop area. For best results,

start the hood before cooking and allow it to operate several

minutes after the cooking is complete to clear all smoke and

odors from the kitchen.

The hood controls are located on the front side of the canopy.

A. Louver holes (non-vented

[recirculating] installations only)

B. Duct covers

C. Control panel

D. LED lights

RANGE HOOD USE

E. Metal grease filters (located

behind the perimetric cover)

F. Perimetric cover

G. Glass canopy

H. Light switch

(ambient lighting)

A. Blower speed maximum button

B. Blower speed medium button

C. Blower speed minimum button

D. Blower off button

E. On/Off LED task light button

Operating the LED task light

The On/Off light button controls both lights. Press once

for on and again for off.

Operating the blower

The Blower Speed buttons turn the blower on and control the

blower speed and sound level for quiet operation. The speed

can be changed anytime during fan operation by pressing the

desired Blower Speed button.

The Blower Off button turns the blower off.

Operating the Ambient Lighting

The switch controls the ambient lighting.

1. Press to the left to turn Auto On.

2. Press to the right to turn Ambient Lighting On.

3. Press to the center to turn Ambient Lighting or Auto Off.

NOTE: When the Ambient Lighting is placed in the Auto setting,

a sensor will automatically sense if it is dark in the area around

the range hood. The Ambient Lighting will turn on and stay on

until it senses there is enough light in the area around the range

hood, or the Ambient Lighting switch is placed in the On or

Off position.