Firesense 63246 Manuel - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Firesense 63246. Firesense 63246 6 pages. Round tempered glass wind guard for gas fire pits
Également pour Firesense 63246 : Manuel d'instructions (6 pages)

Imprimer la page

INFORMATION

BEFORE YOU BEGIN

Before beginning assembly, make sure all parts are present. Compare parts received with the "Package

Contents." If any part is missing or damages, do NOT attempt to assemble the product. Please read and

understand this entire manual before attempting to assemble, operate, or install this product. If you have

SAFETY INFORMATION

WARNING

DO NOT stand or allow children to stand on the assembled product. DO NOT place anything on top of the

assembled product. DO NOT tighten screws completely until instructed to do so. After final alignment, make

sure all hardware is securely fastened before attempting to move the unit. NEVER use a power tool to

assemble or adjust your item. Perform periodic checks to make sure the hardware is secure and tighten if

needed.

CAUTION

Read all instructions before beginning assembly. Failure to do so may result in faulty assembly and potential

injury. Assemble the item on a soft, non-abrasive surface such as a towel or blanket to avoid damaging the

item.

CARE

When wind guard is completely cool, it may be cleaned with a soft cloth or paper towel and standard glass

cleaner. Never spray cleaner or water on a hot wind guard, as it could crack or shatter.

Store the wind guard in a safe place during poor weather or when not in regular use.