BackYardCity Super Tube Manuel d'instructions - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} BackYardCity Super Tube. BackYardCity Super Tube 11 pages. Spiral slide
Imprimer la pageSTEP 4: ASSEMBLING THE SECOND CURVED SECTION
Locate a top SLIDE SECTION (Labeled #2) with an overlapping lange and a bottom SLIDE SECTION
(Labeled #3) without an overlapping lange. Fasten the top and bottom SLIDE SECTIONS together
along the langes (ribs) with 5/16" x 1" hex bolts and 5/16" lock nuts. Use a washer on both sides of the
lange (rib). Make sure to place a nut/bolt with washers in each hole provided on the inside and outside
ribs of the SLIDE SECTIONS.
NOTE: DO NOT TIGHTEN UNTIL ALL BOLTS, NUTS, AND WASHERS ARE IN PLACE.
NOTE: DO NOT TIGHTEN UNTIL ALL BOLTS, NUTS, AND WASHERS ARE IN PLACE.