Bacteo Tower BT0H10S10 Manuel de l'utilisateur - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Bacteo Tower BT0H10S10. Bacteo Tower BT0H10S10 11 pages.

Motion detection

If you are disinfecting a room with walls consisting of glass, drywall or thin plywood – motion

sensor may detect movement though such walls and stop the disinfection process. If you are

disinfecting a room with windows that are not covered with curtains, motion sensor may

detect movement outside of the window (tree movement from wind, birds, etc.).

Motion detection may not be effective if the are obstacles between the Bacteo Tower and the

moving object. Place the Bacteo Tower on a flat, level surface for most effective motion

detection.

Operate the Bacteo Tower with common sense and following the manual – even though it will

stop the disinfection process if movement nearby the lamp, it is highly unrecommended to

enter the room while the disinfection is in progress.

Changing the UV-C lamp

Bacteo Tower is only compatible with Philips TUV PL-L 95W/4P HO 1CT/25 lamp. DO NOT

use any substitutes or non-original lamps, as it may cause damage to the unit, as well as

shock or fire hazard.

To remove the lamp from the Bacteo Tower:

1. Remove the plastic top cover of the lamp.

2. Simultaneously press the 2 metal pins on the bottom plastic part of the UV-C lamp itself.

3. Then, carefully lift the lamp out of its housing. Dispose of the lamp according to safety

instructions.

For more information and support, please go to