Firetainment FIRE TABLES Manuel du propriétaire - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Firetainment FIRE TABLES. Firetainment FIRE TABLES 16 pages.
Imprimer la pageLP GAS CONNECTION INFORMATION
INSTALLERS OF ANY FIRETAINMENT PRODUCTS MUST BE LICENSED, CERTIFIED, AND FAMILIAR WITH ALL LOCAL
ALL TABLES COME PRE-ASSEMBLED FOR LP APPLICATIONS (BELOW). PLEASE REVIEW THE INFOR-
MATION ON THE NEXT PAGE TO CONVERT YOUR FIRETAINMENT TABLE TO BURN NATURAL GAS.
WARNING: Confirm "Gas In" is towards the control valve or shutoff valve. Installing backwards will result in a
severe gas leak and risk of explosion.
WARNING: A pan MUST be used on LP systems and configured in a way to minimize fuel settling below the
pan. Failure to do so may result in personal injury or explosion.
1. Ensure gas to the fire pit location is shutoff.
2. Remove parts from the packaging material and inspect for any signs of damage or corrosion.
3. If re-assembling a burner assembly strictly follow the assembly setup instructions below.
4. Call manufacturer for clarification as needed.
5. Apply pipe dope or gas rated tape to all threaded connections.
6. Perform a leak test on all fittings and back pressure checks for LP with media installed.
LP AIR-MIXER ORIFICE
Air Intake
Gas In
BURNER CONFIGURATION
Owner's Manual
CODE REQUIREMENTS
LP—PROPANE ASSEMBLY INSTRUCTIONS
Gas Out
.
LP GAS SUPPLY PRESSURE:
(Gas pressure and type should be checked prior to use
or installation)
MINIMUM = 8.0" W.C.
MAXIMUM = 11.0" W.C.
LP BURNER ASSEMBLY SETUP
- PENTA 12" BURNER >
- NIPPLE >
- BURNER PAN >
- COUPLER >
- LP ORIFICE >
- 90 DEGREE ELBOW >
- 24" SS NON-WHISTLING CONNECTOR >
- MIXING VALVE >
- LP REGULATOR W/ 36" SS BRAIDED
HOSE CONNECTION TO LP TANK
Page 6