Bad Boy BB21 Manuel de l'opérateur - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de l'opérateur pour {nom_de_la_catégorie} Bad Boy BB21. Bad Boy BB21 16 pages. 21" push mower

ASSEMBLY - SETUP - ENGINE CONTROLS

Follow these steps to verify proper setup of the mower

equipped the KAWASAKI Zone Start engine.

STEP 8

We recommend verifying that proper cable movement is

achieved at the engine when operating the upper control bar.

- Depress the upper control bar.

- When the upper control bar is depressed it will release the

ﬂ ywheel brake/stop switch at the engine.

- The cable length is veriﬁ ed at the factory however it is

important to understand the function and how to check the

adjustment.

With the control bar in the released position (1) the arm on the

engine at (2) should be able to move forward towards its

limiter. This position of the arm ensures that the ﬂ ywheel

brake and stop switch stops the engine. When depressing the

control bar the stroke of the arm (3) should be a minimum of

7/8" (22 mm) to properly release the engine brake and switch.

STEP 9

Verify that the throttle control is adjusted properly as follows:

- Move the throttle control to the Choke position.

- In the Choke position the arm attached to the throttle cable at

the engine should bottom out at the arrow (1).

- If needed an adjustment can be made at the throttle control.

Following these steps for the throttle adjustment will ensure

that the Kawasaki engine performs properly for this mower.

The engine speed is adjusted to approximately 3200 RPM at

the factory.

NOTICE:

The engine speed should preferably be checked and veriﬁ ed

with a tachometer. Normal full throttle speed of the engine

should be adjusted to 3200 RPM. An authorized Kawasaki

Engine Dealer can verify and adjust the engine speed properly.

Full Throttle Idle Throttle

Engine Off

(BBC version)

Choke