FIRETECH FT-4X6 Series Manuel d'instruction - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} FIRETECH FT-4X6 Series. FIRETECH FT-4X6 Series 7 pages. 4x6” headlights

Imprimer la page

WIRING INFORMATION

Parking Lamp (Halo)
DOT Low Beam
DOT High Beam
HiViz LED Lighting HiViz Lighting INC PO Box 565, Naples, NC 28760 Phone: 703-662-3458 Email: [email protected]
Parking:
OFF
OFF
Parking Lamp
(Halo)
DOT
Low Beam
DOT
High Beam

FREQUENTLY ASKED QUESTIONS

1.
What color wires on your headlights correspond to what functions?
Please refer to the wiring diagram on page 8. Generally, black = ground, red = high beam, blue = low beam,
and white = +12v "parking" light (marker lights).
2.
Do I need heated headlights?
Most customers do NOT need heated headlights when choosing a FireTech headlight for their apparatus.
Our headlights are designed to operate flawlessly down to -40°F. While we do offer a heated headlight,
we have customers all over the lower 48 as well as up in Alaska running our standard version without any
problems.
3.
Can I use 2 instead of 4 headlights?
Yes. It is permissible to use 2 high/low FireTech headlights, or 2 high-only headlight in a 4 headlight system.
4.
What do I do with the halo wires?
The halo wires should be wired to the closest "parking light" circuit on the truck. This circuit is the circuit that
powers all of the apparatus marker lights when the headlight switch is in the "first" position.
5.
Can I wire the halos to the low beams?
No. While technically functional, it is not the appropriate use of the SAE "P" parking light circuit in the
FireTech headlight. The halo wire should be wired to the parking/marker light circuit on the apparatus.
6.
Will wig-wagging hurt the headlights? / Can I use them with wig-wag?
Wig-wagging does not cause a problem for the FireTech headlight. In some instances, if the wig-wag module
does not operate correctly post-installation, adding a resistor kit may be helpful. Please contact HiViz Lighting
if you have questions or need troubleshooting support. LED Light resistor kits are generally available at your
local auto parts store.
7.
Are the headlights waterproof?
FireTech headlights are rated IP69K, which means they are designed for sustained high pressure spray. The
GORE PolyVent on the headlight is designed to allow for pressure equalization but is not designed for
submersion. If your application calls for fully submersion rated operation, please contact HIViz Lighting for a
PolyVent delete kit.
8
HiViz LED Lighting HiViz Lighting INC PO Box 565, Naples, NC 28760 Phone: 703-662-3458 Email: [email protected]
9