Firetide HotPort 7010 Manuel d'installation du matériel - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel d'installation du matériel pour {nom_de_la_catégorie} Firetide HotPort 7010. Firetide HotPort 7010 16 pages. Indoor and outdoor wireless mesh nodes

Imprimer la page

Appendix B - Connector Wiring

HotPort Outdoor Node AC Power Connector

Figure 6 shows the pinout of the AC Power connector used on Series 7020 outdoor nodes. Views are shown of both the connector on
the unit, and the mating connector on the cable itself. Pin 1 is neutral; pin 2 is line, and pin 3 is ground.

HotPort Outdoor Node DC Power Connector

Figure 7 shows the pinout of the power connector used to supply power to Series 7020 nodes. Each view is of the cable connector, as
viewed end-on. Pin 4 is +12VDC power. Pin 3 is ground.

Custom Power Cables

Firetide offers an accessory DC power cable. The part number is 3200-2401, and this cable can be used to connect other DC sources
to your Series 7020 node. One end of the cable has the six-pin connector used by the Series 7020; the other end has a weatherproof
4-pin connector. Both connectors are of the LTZ type. The cable is wired as shown in Figure 8.
Custom cables can be built in either of two ways.
1. You can obtain a 4-pin female LTZ connector and build an adapter cable.
2. You can cut the 4-pin male LTZ connector off the cable and attach whatever type of connector you require.
4-pin LTZ
Connector
DC power to a HotPort node must be 12 VDC ±15%, at 3A. Series 7020 nodes can provide PoE-compliant 48 VDC power to other devices.
12
HotPort 7000 Series Mesh Nodes
Figure 6. Series 7020 AC Power Connector
3-ground
1-neutral 2-line
Series 6200 AC Power
Connector View
Figure 7. Series 7020 DC Power Connector
Series 6200 DC Power Connector
3 ------- ground ------- 3
4 --- power --- 4
2
6
5
1
Cable-End View
Figure 8. DC Power Adapter Cable Wiring
brown
Pin 1
blue
Pin 2
black
Pin 3
white
Pin 4
3-ground
2-line
1-neutral
Series 6200 AC Power
Cable-End View
2
6
5
1
Connector View
positive-lead power
Pin 4
(nominal +15 volts)
ground/drain
Pin 3
Series 6200
DC Power Connector
3 ------- ground
2
4 ---- power
6
5
1
Cable-End View
September 2010