Alcofind AF-100S Manuel de l'utilisateur - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Alcofind AF-100S. Alcofind AF-100S 16 pages.

DISPLAY OF SIGNAL LAMP

Step 1. Press LIGHT button for a second during the countdown or the ready

mode. There are seven different signal lamps, and the selected signal lamp is

shown on the back side of the status light.

Step 2. Press LIGHT button to finish it and move on the countdown.

SETTING SIGNAL LAMP

AF-100S offers seven different signal lamps and user can select a different

signal lamp through this mode.

Step 1. Press and hold down ON/OFF and LIGHT buttons together for

5 seconds.

Step 2. There are seven different signal lamps as below. Change the signal

lamp by pressing the LIGHT button.

MODE 1

MODE 2

MODE 3

MODE 4

MODE 5

MODE 6

MODE 7

Step 3. Press PASSIVE button to save it and move on the countdown.

Blue and red LED will blink by turns in the interval of

0.1 seconds.

Blue and red LED will blink by turns in the interval of

0.3 seconds.

Blue and red LED will blink by turns in the interval of

0.5 seconds.

Blue LED will blink in the interval of 0.3 seconds.

Blue LED will remain on.

Red LED will blink in the interval of 0.3 seconds.

Red LED will remain on.