AlcoLimit DEFENDER Manuel de l'utilisateur - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AlcoLimit DEFENDER. AlcoLimit DEFENDER 12 pages.

Press the ON/OFF button as soon as the Red or Green LED light turns off. The breathalyser

will then start the countdown for the next test.

To retest, if your AlcoLimit DEFENDER has turned itself off, depress the on/off button, and

wait for it to warm up again.

When high alcohol readings are received, retesting should be spaced 3 minutes apart to

allow all alcohol vapour to be eliminated from the sensor.

Your %BAC will be displayed on the screen for 20 seconds after which your ALCOLIMIT

DEFENDER will turn itself off.

Breath Alcohol

Concentration (BAC)

0.000-0.049%

0.050 - 0.400%

0.400 upwards

This device is a 0.05% BAC device (0.05%BAC is equal to 0.05grams of alcohol per 100ml of

blood).

Australian & New Zealand Customers: The drink driving cut-off for people on a full licence

is 50mg per 100ml of blood. This equates to 0.05%BAC.

This is current as at April 2015. The Australian & NZ Govts. may change this level in the future

so please check before driving.

PLEASE NOTE: Alcohol vapour on your breath will cause a higher reading. We recommend

having a glass of water prior to testing and waiting at least 20 minutes after your last drink

for accurate results. Not waiting the required 20 minutes will saturate the sensor unneces-

sarily and may cause sensor damage. This is not covered under your warranty.

Please always wait 20 minutes after consuming any alcohol to avoid this problem.

AlcoLimit

RETESTING

DISPLAY & INTERPRETATION

Digital Display and Audio Signals

%BAC displayed on screen with audible beep and Green LED

light

%BAC displayed on screen with one long audible beep and

Red 'WARN' LED light

'HOT' will appear on the screen indicating the maximum level

has been reached

DEFEN DER

-6