ALcom AT6128 Manuel de l'utilisateur - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} ALcom AT6128. ALcom AT6128 14 pages.

3. Press one of numeric keys (0-9)

Make a call from two-touch memory

In off-hook or handsfree state, press ST/RECALL + numeric key (0-9), the relevant number will be

dialed.

LOW BATTERY DETECTION

When the voltage is lower than 3.9V, LCD displays "

" icon to remind the user to replace the

batteries.

LCD BACKLIGHT FUNCTION

The backlight is turned on when receiving an incoming call, dialing, pressing any key. It will fade

off if the telephone is left idle for several seconds.

NOTE: If batteries are not loaded, there will be no LCD backlight function.

TIME FUNCTION

Pick up the handset or press

key and dial a number, then press DEL key, the unit will start to

time at once. Otherwise it will time after 6 seconds automatically.

FLASH FUNCTION

When you dial a number and the line is engaged, press FLASH/÷ key and then press REDIAL key

to redial the number.

PAUSE FUNCTION

If dial a number from PABX extension, press PABX number (normally "0" or "9") + ALARM/P +

desired number. When redial, need not dial PABX number and ALARM/P key, just press REDIAL

key.

LOCK

Turn the key to yellow point, all numbers are locked except emergency numbers (max. 3 digits)

starting with 0, 1 or 9.

Turn the key to green point, all numbers starting with "0" or long distance code are locked.

Turn the key to red point, all numbers are allowed to be dialed out.

BABYCALL FUNCTION

At on-hook state, press and hold REDIAL key for 3 seconds to come into baby call function setting.

LCD displays BABYCALL OFF, press REDIAL key to set it ON, press SET key. LCD displays

NO CODE (or the preset baby call number, press DEL key to cancel), input baby call number