ALcom CL-3399 ID Manuel de l'utilisateur - Page 18

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} ALcom CL-3399 ID. ALcom CL-3399 ID 18 pages. Caller id digital enhanced cordless telephone

Imprimer la page

Caller ID On Call Waiting

When you have subscribed to call

w a i t i n g s e r v i c e f r o m y o u r l o c a l

company, this telephone will indicate

the number of the second caller while

you are having a conversation with the

first caller.

Battery Level Indicator

The

icon iscontinuously displayed

at the top right corner of the LCD w indow.

The

icon shows the level of battery

power. The more bars you see, the more

power you have left.

When the battery is too weak for the

phone to operate, the handset will

automatically turn o ff. Place the handset

Key Lock

If you turn thisfeature on, allbuttons

except for the

button will be locked

and willnotfunction.

You can answer incoming calls or

intercom calls by using any buttons on

the phone. But when you hang up, the

phone returns to the lock mode. This

feature is useful to avoid pressing

buttons by mistake.

1. To turn the feature on, press the

ASIC UNCTION

When you are having a conversation

and a second call is received, press the

C/R

button to answer the secondcaller.

When you finish the call, press the

button to continue your conversation

with the first c aller.

on the base to charge the handset battery.

Full

Flat

£º

button briefly and the

icon

appears in the LCD window.

2. To turn the feature off, press the

button briefly and the

icon

disappears from the LCD window.

Notes:

¡ñ

If a power failure occurs, the Key Lock

feature is automatically cancelled.

¡ñ

Do not hold the

button for more

than 3 seconds, or the handset will be

turned off.

Smart Dialing

With the Smart Dial feature,your phone

displays the full phonenumber when

you enter the first digit(s) o f t h e number

C/R

provided thatthe number is currently

stored in your phone's memory (for

example, stored in the phonebook,

received or d ialed recently).

To place a call using the smart dial

feature:

1. In Standby mode, enter the first

digit(s) ofthedesiredphone number.

Result:

The phone searches for the

matching phone number from

memory (in the order of

outgoing calls, Phonebook,

incoming calls), then displays

the first available number.

Numbers blink except for the

part of the number you entered.

Out of Range Indication

If the handset is too far from the

registered base, the handset cannot

properly engage the telephone line. T h e

icon at the top left of the LCD window

blinks to warn you and the signal

strength indication bars next to the

icon disappear.

This icon blinks

when the handset

is out o f range.

2. If the number is not the one you want,

enter the remaining digits until you

see the desired number.

3. Press t he

button t o dial the

number displayed. O r press the C/R

button to exit this smart dial mode.

You can s elect to enable or disable the

Smart Dialing

feature. To change the

setting:

1. Press t he

button.

2. Press t he

button repeatedly

to choose

, then press

the OK button.

Result:

The current setting is displayed.

3. Press t he

button repeatedly

to choose

To enable this feature, select

4. Press t he OK button t o save the

selection.

If you carry the h andset too far f r o m t h e

base unit during a call, the telephone

line mightbedisconnected and the

handset returns t o Standby mode.

Check if there is n oise or static. If so,

move the handset closer to the base

station.

£º

ASIC UNCTION