ALCON ALCON-883BH Manuel de l'utilisateur - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} ALCON ALCON-883BH. ALCON ALCON-883BH 15 pages. High quality cordlessphone system

Imprimer la page

COAXIAL CABLE MOUNING

4. Feed the coaxial cable through the support. Mount the high gain antenna on to the

support by aligning the holes found on the antenna support with those found on the

antenna. Secure the structure by using the screws provided (see illustration).

5. Fix the cable securely using cable clamps and run the cable to the base station unit, then

connect it to back.

Note: The coaxial cable distance can be longer than the 30M available (provided you use the

same or similar specification of cable), but the recommended length is 30M or less (the less

length the better.).

6. When securing the coaxial cable, we recommend you turn the coaxial cable once to make

a small loop (about 15 to 25 cm in diameter) near the antenna support to prevent

excessive load from the cable on the antenna connection and to protect the coaxial cable

and antenna connection from being damaged when accidentally pulled. See illustration for

more details.

 CHARGING The BATTERY

Use the adaptor 12V 300mA included for efficient battery charging of the ALCON-883BH

Handset battery. Simply plug the adaptor into the socket of the handset battery and it will

automatically begin charging. It is best to charge between 8 and 10 hours at a time. You can

charge the battery separately or when placed inside the handset unit.

Note: Only charge the battery with the adaptor included.