ALCON CT-88 Manuel du propriétaire - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} ALCON CT-88. ALCON CT-88 9 pages.

FUNCTION KEYS :

ANSWERING WITH THE CT-88 Remote Unit

ANSWERING WITH THE BASE UNIT

AT-526

SCRAMBLE FUNCTION & DATA TRASNSMISSION

To prevent somebody from eavesdropping on your conversation, use the Scramble function. .

Make sure the Remote POWER switch is ON.

1. When a call comes in, the Normal

Telephone will ring.

The TEL indicator will flash.

2. Pick-up the handset of the Normal

Telephone and begin your conversa-

tion.

The TEL indicator will illuminate.

3. Hang up .

It is possible to connect a normal

telephone to the Base Unit and then have it

answer the incoming calls. There is an RJ-

11 telephone socket on the back of the Base

Unit for this purpose. This normal telephone

for the Base Unit is not included in the stan-

dard package.

Press the SCRAM. button to ativate

1.No SCRAM. indicator is nromal(Tel.)

2.SCRAM. indicator on(flashing) is

Data Transmission

3.SCRAM. indicator on is Scramble fun-

tion

NOTE :

If there is blackout when the system had the Scramble Function engaged or disengaged,

the system will always return to that setting when the power returns.

The system should be in standby mode to engage or disengage the scramble function.

PLACING A CALL

Remote / Mobile UNIT

Switch the Remote/ Mobile unit ON (the POWER indicator should illuminate), making sure

that the telephone cord is plugged into the house socket.

1. Pick up the telephone handset of the

normal telephone and check if there is

dial tone.

The TEL indicator will illuminate.

2. Dial the number you wish to call.

3. hang up the handset when you have fin-

shed the call.