Firex PMDE100 Manuel d'instruction pour l'installation, l'entretien et l'utilisation - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour l'installation, l'entretien et l'utilisation pour {nom_de_la_catégorie} Firex PMDE100. Firex PMDE100 16 pages. Electric kettles
Imprimer la page−
Main structure in AISI 430 with 4 adjustable height feet.
−
Panels in stainless steel AISI 304, thickness 10-12/10.
−
Cooking vat in stainless steel AISI 316, thickness 20/10 ÷ 40/10.
−
Chrome-plated brass drainage tap.
−
The temperature limiting device which switches off automatically the appliance in case of overheating of
cooking-vat-bottom.
−
Stainless steel lid with heat-resistant silicone gasket.
−
Hermetic closing of lid ensured by 4 screw clamps.
−
The relief valve for the pressure that develops inside the cooking vat is set at 0,05 bar.
−
On request, the appliance can be equipped with a pressure gauge indicating the pressure inside the
cooking vat.
1.4. LAWS, TECHNICAL PRESCRIPTIONS AND DIRECTIVES
When installing the appliance it is necessary to follow and comply with the following regulations:
−
current regulations on the matter;
−
any hygienic-sanitary regulations concerning cooking environments;
−
municipal and/or territorial building regulations and fire prevention prescriptions;
−
current accident prevention guidelines;
−
electricity board regulations concerning safety;
−
the regulations of the electrical power supply company or agency;
−
any other local prescriptions.
1.5. SPECIAL REQUIREMENTS FOR THE INSTALLATION SITE
−
The room in which the appliance is to operate must be well ventilated.
−
In addition, it is good policy to locate the appliance under an extractor hood so that cooking vapours can
be removed rapidly and continuously.
−
Current regulations require the installation of a multiple pole switch between the appliance and the
electrical power supply; the switch must have a contact gap of least 3 mm on each pole.
−
This appliance requires two water connections: one for hot and one for cold water. Each line must be
fitted with an on-off valve.
Warning! :
The electrical isolating switch and the water shutoff valves must both be located near
to the appliance, within easy reach for the user.
Instruction manual for installation, maintenance and use
Electric Kettles PMDE...
1.3. CONSTRUCTION
1.3.1. DETAILS ONLY FOR PRESSURE KETTLES
- GB -
7 di 16
Page