CALEFFI DISCAL 551003A Series Instructions d'installation, de mise en service et d'entretien - Page 2
Parcourez en ligne ou téléchargez le pdf Instructions d'installation, de mise en service et d'entretien pour {nom_de_la_catégorie} CALEFFI DISCAL 551003A Series. CALEFFI DISCAL 551003A Series 12 pages. Air separator
Également pour CALEFFI DISCAL 551003A Series : Instructions d'installation, de mise en service et d'entretien (12 pages)
Imprimer la page
Technical specifications
Brass air separator
Materials
- body:
- internal element
(compact and rotating collar versions):
- internal element:
- seal:
- air vent float:
- air vent float linkages:
- air vent float guide pin:
Performance
Suitable fluids:
Max. percentage of glycol:
Max. working pressure:
Temperature range:
Air separation efficiency:
Connections - main:
compact series:
horizontal:
rotating collar version, 5517 series: ¾" and 1" sweat, press and NPT male union
- lay length (press connection):
-
drain:
Steel air separator
Materials
- body:
- internal element:
- seal:
- air vent float:
- air vent float linkages:
- air vent float guide pin:
Performance
Suitable fluids:
Max. percentage of glycol:
Max. working pressure:
Temperature range:
Air separation efficiency:
Connections - flanged:
- drain pipe:
Agency Approval
NA551 series is designed and built in accordance with Section VIII, Division 1 of the ASME Boiler
and Pressure Vessel Code and tagged and registered with the National Board of Boiler and
Pressure Vessel Inspector, and CRN registered (12" pending, contact Caleffi).
3/4" , 1" , 1-1/4",
1" , 1-1/4",
1",1-1/4",1-1/2"
5517 series:
sizes 2-6": 150 psi (10 bar); sizes 8-12": 200 psi (14 bar)
2"– 12" ANSI B16.5 150 CLASS RF
2
304 stainless steel
glass reinforced nylon PA66GF30
peroxide-cured EPDM
stainless steel
stainless steel
water, glycol solution
150 psi (10 bar)
32–250°F (0–120°C)
100% to micro-bubble level
3/4" sweat; 3/4" NPT female
1-1/2"
and 2" NPT female
1-1/2"
and 2"integral sweat
and 2" integral press
see page 4 and 5
1/2"
NPT female
1/2" straight female
epoxy resin painted steel
304 stainless steel
peroxide-cured EPDM
stainless steel
stainless steel
water, glycol solution
32–270°F (0–132°C)
100% to micro-bubble level
sizes 2 - 6 inch: 1" NPT male
sizes 8 - 12 inch: 2" NPT male
brass
PP
50%
PP
50%