ErgoAV ERMMS1 -01 B Manuel d'instruction - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} ErgoAV ERMMS1 -01 B. ErgoAV ERMMS1 -01 B 16 pages. Motion tv mount

Imprimer la page

: NOTE: Do not use a drill to tighten the lag screws. Only use a socket wrench. :

C - - -

- - - - -

' '

-----

......

--~-

Install the arm assembly/wall plate

[03] using lag screws [A 1 ]. Tighten the

lag screws [A 1] only until the they are

pulled firmly against the arm assem-

,-. bly /wall plate [03]. DO NOT

[) over-tighten the lag screws [A 1 ].

_,,

, ,

Level

(Not Included)

1 /2 in (13mm)

Socket Wrench

(Not Included)

Step 38 Solid Concrete Wall Option

WARNING:

• Avoid potential personal injury or property damage! DO NOT over-tighten the lag screws

[A 1]. Tighten the lag screws [A 1] only until they are pulled firmly against the wall plate.

• Ensure the wall plate is securely fastened to the wall before

continuing to the next step.

• Mount the wall plate directly onto the concrete surface without any

covering.

• The thickness of the concrete wall must exceed 5.5 in (140 mm).

Do not use a drill for tightening the lag screws! Only use a socket wrench.

38-1

...........

,,,-

Wall

Anchor

Position wall plate template [08]

at your desired height, level the

wall plate template [08] and

mark the pilot hole locations.