Direct Healthcare Group Gate EASY SoftBack Manuel technique - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel technique pour {nom_de_la_catégorie} Direct Healthcare Group Gate EASY SoftBack. Direct Healthcare Group Gate EASY SoftBack 20 pages.
Imprimer la page
4. Cleaning and maintenance
The chair is made of stainless steel pipes (powder coated) and aluminium. Exposed details that have not been
painted are made of aluminium or stainless steel. Be sure to check that the product feels stable / slip-free - no
loose screw joints may be present. Damaged or defective parts should be replaced as soon as possible.
After performing maintenance below, reset the service indicator (see page 7).
Cleaning, general
•
Clean the chair by wiping with a common detergent (NOT based on Pentanol) or washing machine / auto-
clave (max 85 degrees).
NOTE: Remote control / control box or coupling (female) (if remote control is removed before washing) must be
protected from high pressure water. This can be done with a plastic bag or the like that can withstand the wa-
ter pressure of the washing machine. Place remote control / control box or connector (female) so that running
water cannot penetrate.
•
Seat - can be removed and cleaned separately or washed in machine / autoclave (max 85 degrees).
•
The pillars - cleaned with commonly used cleaning / disinfectants in health care (alcohol-based). The pillars
should be cleaned with agents that partly dissolve fat and partly remove lime stains. When cleaning the
pillars, the chair is set at maximum height. Apply detergent and allow to work as directed (make sure the
agent also flows into the pillar), rinse.
NOTE: At regular intervals, the pillar bottom plate should also be cleaned - this is done by removing the bottom
plug (see Figure 18) and cleaning agent applied directly to the pillar. Let water work / rinse out. Mechanical
machining may be needed.
NOTE: To avoid pinch damage - be sure to always reposition the protective cap.
TEC HN I CAL MANU AL
G ATE RD .SE
7